機床商務網
詳細介紹
| ? 說明／ |  |
| 1. 設有油位檢知器，可清楚了解除油狀況。 2. 給油機與風壓出口設有壓力表及風壓表。 3. 設有多道過濾裝置以保持油品質。 4. 以容積式定量給油，保持油量穩定度。 5. 使用油品黏度：ISO VG 30-68 | |
| ? Description／ | |
| 1. The feeder has a sensor for indicating the oil volume. 2. Both of the outlets of oil and air are installed with pressure gages. 3. There are many filters are installed to keep the oil clean. 4. The feeder injects the oil quantitatively to keep the oil supply stably. 5. Viscosity of oil: ISO VG 30~68 |
| 型式/TYPE | TKS-8 | TKS-8E | TKS-8AE | ||||
| 流量/Max.Flow | 250cc/min | 250cc/min | 250cc/min | ||||
| 油壓/ Oil Pressure | 2~15kg/c㎡ | 12~15kg/c㎡ | 12~15kg/c㎡ | ||||
| 風壓/ Air Max.Pressure | 3~5kg/c㎡ | 3~5kg/c㎡ | 3~5kg/c㎡ | ||||
| 浮球開關 Float Swith | ● | ● | ● | ||||
| 油箱 Oil Tank | 容量 Capacity | 4.6L | 8L | 4.6L | 8L | 4.6L | 8L |
| 材質 Material | 鋁製 Aluminum | 鈑金 SheetMetal | 鋁製 Aluminum | 鈑金 SheetMetal | 鋁製 Aluminum | 鈑金 SheetMetal | |
| 管路壓力訊號裝置 Oil Pipe Pressure Signal | 可自由選配 Take Your Choice | ||||||
| 釋壓保護裝置 Pressure Protection Devic | ● | ● | ● | ||||
| 潤滑時間 Lubrication Timing(sec) | 1~180sec | ||||||
| 間歇時間 Intermittent Timing(sec) | 1~180sec(min) | ||||||
| 電壓 Voltage(50/60HZ)Single Phase | 110v 220v 單相 | 110v 220v 單相 | 110v 220v 單相 | ||||
| 馬達出力功率 Consumption Power | 45W | 45W | 45W | ||||
| 脫壓裝置(E) Pressure Relief Device | ● | ● | |||||
| 接頭口徑 Joint Bore | 4Φ or 6Φ | 4Φ or 6Φ | 4Φ or 6Φ | ||||
| 備註 / Remark | |||||||
| 1. 氣壓調整器 Air Pressure Adjustment | 8. 風壓表 Air Pressure |
| 2. 潤滑時間 Lubrication Timing | 9. 注油口 Oil Inlet |
| 3. 間歇時間 Intermittent Timing | 10. 端子座 Terminal Base |
| 4. 電磁閥 Solenoid Valve | 11. 進風口 Air Inlet |
| 5. 馬達 Motor | 12. 出油口 Oil Outlet |
| 6. 油壓表 Oil Pressure | 13. 出風口 Air Outlet |
| 7. 給油鍵 Oil-Feed Key |
機床商務網