LB-9711D立式數控板材加工中心

產品介紹INTRODUCTION

1.速度快，效率高:運行速度可達每分鐘50米，切割12MM鋁板速度可達到1.5M/min- -4M/min

2.力量大:真空分區吸附臺面，確保板材加工不跑板，切割鉆孔- -次性可對鋁板下刀3~8MM切割口平滑，無毛邊，不變形。

3.精度高:四軸系統，采用總線控制，電腦控制對于細小的物品能夠做到準確的定位。

4.穩定性好:可-天24小時不間斷工作，也可以隨時加工隨時停止，廢品率低。

5.部件優良:采用德國高溫淬火齒輪齒條傳動，進口直線導軌，選用優秀的數控系統，進口軸承，大功率進口電主軸。

6.設計合理:采用*的齒軸齒條傳動，速度快，力量大，切割斷面光滑光潔。

7.軟件兼容:導入NC文件直接加工，可兼容Type3/Artcam/castmate/文泰等多種CAD/CAM設計制作軟件。

8.性能無憂:整機生產過程以及出廠前，經過嚴格質檢管控及試機加工測試，確保加工精度精準擁有斷點，真正的人性化設計。

9.可選配:自動,上料機，自動打碼機。

1. Fast speed and high eficiency: the running speed can reach 50m per minute, and the cutting speed of 12mm aluminum plate can reach 1.5m/min-4m/min

2. Strong power: Vacuum partition adsorption table to ensure that the plate processing does not run off the plate. Cutting and dilling can cut the aluminum

plate for 3~8mm at one time, and the cutting mouth is smooth without burr and deformation.

3. High precision: the four axis system adopts bus control and computer control, and can accurately locate small items.

4. Good stabilit: it can work 24 hours a day, or stop processing at any time, with low scrap rate,

5. Excellent components: it adopts German high-temperature quenching gear rack transmission, imported linear guide rail, excellent CNC system, imported

bearings and high-power imported motorized spindle.

6. Reasonable design: adopt advanced gear shaft and rack transmission, with high speed, large force and smooth cutting section.

7. Software compatiblit: importing NC files for direct processing, compatible with type3 1 ArtCAM/ castmate /Wentai and other CAD 1 CAM design and

production software.

8. Worry free performance: during the production process and before leaving the factory, the whole machine has undergone strict quality control and trial

machining test to ensure accurate machining accuracy, breakpoints and truly humanized design.

9. Optional: automatic feeding machine and automatic code printer.

LB-9711D立式數控板材加工中心技術參數：