CGK系列大型雙端數控車床

設計了雙主軸箱，一側主軸可移動。滿足了不同加工長度工件切削剛性要求。
A double main axle box is designed, one side of the main axle can move. The requirements of cutting rigidity of workpieces with different machining length are met.
機床采用左右床鞍、雙刀架、雙系統控制，可單獨對刀，調整，--次裝夾兩端同時獨立切削。主軸采用變頻無極調速150~700r/min
The machine tool adopts left and right bed saddle, double tool rest and double systemcontrol, which can be adjusted and adjusted independently, and both ends of one clamping can be cut independently at the same time. The spindle adopts frequency conversion stepless speed regulation 150 ~ 700 r/min.
達到同軸度≤0.02mm，也可作為以車代磨的可靠工藝基準，提高工效4~6倍。
When the coaxiality is less than or equal to 0.02mm, it can also be used as a reliable technological standard to replace grinding with vehicle, and the work efficiency can be increased by 4-6 times. 

CGK系列大型雙端數控車床