品牌：NTH

1. 適用于軸類工件加工，卡盤具有補償式夾緊和后拉的功能，對中心的補償量為5mm。

2.  尾座支撐工件，卡盤補償夾緊后，把工件拉向中心，依此加工后同軸度會非常好。

2. The tailstock support the shaft, after compensation clamping, the chuck pull the shaft back to center, better concentricity can be made.

UNIT: mm

備注：FWD-06為彈性，在夾持工件時，以中心為基準補正，同時可使工件接觸到端面，便于軸向定位。

Remark: FWD-06 chuck’s center is spring type, when clamping, it’s based on the center, the workpiece could be pulled onto the position base, so as to make axial postion.

保留技術更改的權利,恕不另行通知 Subject to technology changes without prior information

非標需求可定做 Non-standard requirements can be made