機床商務網
詳細介紹
WXHY-009A 深孔內圓磨床
機床的主要特點 Main Characteristics
• WXHY-009A型內圓磨床主要用于磨削深孔。
•磨孔直徑45-300mm，大磨削深度1000mm。（經特殊訂貨磨孔直徑可增大至500mm,大磨削深度可至 1200mm)。
•床頭主軸采用交流變頻無極調速。
•床頭箱回轉角度+10° （可磨削錐孔）。
•工作臺行程速度采用液壓無級調速。
•ZXY-009A tape internal grinder is mainly used to grind the deep hole.
•Grinding diameter of 45-160mm, max. grinding depth of 1000mm. (For special order, the grinding diameter can be enlarged to 500mm, maximum depth of grinding up to 1200mm)
•AC freq conversion & stepless speed-regulation for workhead spindle is used.
•The headstock can be swivelled over an angle of + 10°(for taper hole)
• Hyd system can be used to perform stepless speed-regulation of table.
WXHY-009A 深孔內圓磨床
機床型號 | WXHY -009A | ||
磨削孔徑 | Bore dia ground | (mm) | ф45-ф300 |
磨孔大深度 | Max. depth of bore o be ground | (mm) | 1000 / 1200 特殊訂貨 Optoonal |
工件大旋徑 | Max.swing diameter of part | (mm) | ф500 / ф600 特殊訂貨 Optoonal |
工作臺大行程 | Max. travel of worktable | (mm) | 1200 /1400 特殊訂貨 Optoonal |
床頭箱回轉角度 | Swivel angle of workhead | (°) | + 10° |
機床總功率 | Machine total power | (kw) | 10 |
機床外形尺寸 | Overall dimension | (mm) | 5500×1650×1830 |
機床重量 | Weight of machine | (kg) | 8500 |
機床工作精度Grinding Accuracies
機床型號 | WXHY -009A | ||
內孔圓度 | Bore roundness | (mm) | 0.005 |
內孔圓柱度 | Cylindricity of bore | (mm) | 0.01 |
內孔表面粗糙度 | Surface roughness of bore | (μm) | Ra0.8 |
機床商務網