欧美zc0o人与善交另类a片,豪妇荡乳1一5潘金莲,A片欧美激情肉欲高潮

設備特點

Features

1.配備理光G5噴頭；

2.高速度（4PASS)32sq.m/hr；

3.色彩鮮艷，立體感與沖擊感都非常好；

4.配備PHOTOPRINT軟件，操作靈活打印穩定；

1. Equipped with Ricoh G5 high-end nozzle;

2. High speed (4PASS) 32sq.m/hr;

3. Perfect color, unparalleled sense of three-dimensionality and impact;

4. Equipped with PHOTOPRINT software, flexible operation and stable printing.

操作技巧

Operational skills1

1、首先就是不要頻繁的啟動YSL-3200R高速打印機。因為本設備的每次啟動，打印機都會清洗打印頭和初始化打印機，而且墨水輸送系統充墨，就會造成墨水的浪費問題。

2、第二就是選擇合適的打印模式進行打印。我們提供了幾種打印模式，不同的打印模式消耗的墨水量是不同的。

3、第三就是選擇好墨水。我們一般都會建議購買墨水的類型，請嚴格按照說明書里推薦的墨水來購買。要去正規的地方購買墨水。劣質墨水會堵塞噴頭，嚴重的話會導致噴頭損壞。噴頭的價格可是很貴的。

4、最后就是偏色問他了。如果打印出來的顏色偏差很大的話，那么就說明出現了偏色現象。這個當然不是設備問題了。主要是操作問題，軟件設置不正確導致的，或者是您的驅動版本太低。我們應該學會校正屏幕顯示和實際打印效果。還有就是不同的打印機軟件，其校正的方法是不同的。因此大家要使用常用的打印機選項吧。

1. The first is not to start the YSL-3200R high-speed printer frequently. Because the printer cleans the print head and initializes the printer each time the device is turned on, and the ink delivery system is filled with ink, it can cause waste of ink.

2. The second is to select the appropriate print mode for printing. We offer several print modes, and the different print modes consume different amounts of ink.

3. The third is to choose good ink. We generally recommend buying the type of ink, please follow the recommended ink in the manual. Go to a regular place to buy ink. Inferior ink can clog the nozzle and, in severe cases, damage the nozzle. The price of the nozzle is very expensive.

4, the last is the color cast asked him. If the printed color deviation is large, then the color cast phenomenon appears. This is certainly not a device problem. Mainly due to operational problems, incorrect software settings, or your driver version is too low. We should learn to correct the screen display and the actual print results. There are also different printer software, the method of correction is different. So everyone should use the usual printer options.

工作壞境

Working environment

1、空氣質量要好。工作中不要有太多的灰塵和顆粒；設備所在的地方空氣流動要小寫，因此空氣流動大的話，會產生空氣對流，就會引起打印飛墨的問題。解決的辦法非常簡單，就是選擇封閉點的工作壞境，墻面的話，建議刷白。地面的話，建議刷地坪漆。

2、其次就是空氣濕度。空氣濕度要控制好。不能在很干燥的地方運作設備非，否則就容易產生靜電，就會影響打印質量。更嚴重有可能引起機器噴頭和主板等的燒壞。解決辦法也很簡單，就是在設備上裝上除靜電裝置，或者的話在設備安裝的時候，可以進行接地。

3、第三就是要保證地面的平整。這樣設備能夠較好的放置在地面上，就不會在工作中搖晃了，這樣也可以保證打印質量。

4、第四就是保證穩定的電壓。有些地區的電壓不穩，也會影響設備的運行，甚至造成設備的損壞。我們建議購買變壓器，來保證電壓的穩定。

1. The air quality is better. Do not have too much dust and particles in the work; the air flow in the place where the equipment is located should be lowercase, so if the air flow is large, air convection will occur, which will cause problems in printing flying ink. The solution is very simple. It is to choose the working environment of the closed point. If the wall is on, it is recommended to whiten it. On the ground, it is recommended to brush the floor paint.

2, followed by air humidity. The air humidity should be controlled well. Do not operate the equipment in a very dry place, otherwise it will easily generate static electricity, which will affect the print quality. More serious may cause burnout of the machine nozzle and motherboard. The solution is also very simple, that is, the device is equipped with a static elimination device, or it can be grounded when the device is installed.

3. The third is to ensure the leveling of the ground. In this way, the device can be placed on the ground better, and it will not be shaken at work, thus ensuring print quality.

4. The fourth is to ensure a stable voltage. In some areas, the voltage is unstable, which will also affect the operation of the equipment and even cause damage to the equipment. We recommend buying a transformer to ensure voltage stability.

設備應用

Device application

細節更精彩

More details