| ●采用平床身布局，半封閉式防護罩設計。 ●主軸孔徑大、高剛度、轉速范圍廣。 ●機床可配置四(六)工位電動刀架，整機采用集中潤滑，提高運動性能。 ●機床電箱、操作箱及管路安裝布置安全合理，完善的解決了電機的防水防屑，提高了整機的安全可靠性及維護性。 ●兩進給方向滑動導軌面均采用貼塑工藝、有效提高了機床滑動性能和使用壽命。 適用范圍： 可對黑色金屬、有色金屬及非金屬進行內外圓柱面、圓錐面、曲面及各種螺紋的粗、精車加工，并能進行循環鉆孔、切槽等。 
| ●the flat bed design and the semi-enclosed safety work space design. ●the spindle hole is big, good rigidity and rotational speed area is broad. ●the machine can match with 4 or 6 position electric toolchanger, and the whole machine uses centralism lubrication system and enhances the movement performance. ● the installment is safe for the machine electric box, operation box and the pipe line, and compley solves waterproofing for motor and enhances the security, reliability and the maintenance for whole machine. ● the sliding guide uses the pastes plastic craft on the two enters, and effectively enhances the glide performance and life for the bed. use domain： can process the round cylinder, the curve surface and each kind of thread thickness on inside and outside for the ferrous metal, the non-ferrous metal and non-metallic and can repetition drilling and slotting etc |
機床商務網
機床商務網