東莞市高必盛壓鑄智能裝備有限公司專門從事研發、生產、批發熱室壓鑄機、冷室壓鑄機、鋅合金壓鑄機及壓鑄自動化設備取件機輸送線和全自動水口分離機。

鋅合金壓鑄周邊設備GS-B2 全自動水口分離機的機械參數與特性

Parameters and characteristics of GS-B2 fully automatic water inlet separator manipulator for zinc alloy die-casting peripheral equipment

-全自動壓鑄壓鑄去水口機，屬于五金鋅合金壓鑄機生產的后續自動化加工去水口工藝設備，產品的機械特性如下：

-采用雙超聲波工作，能對更大噸位壓鑄機坯件進行產品與渣包的分離。

-該設備也適應雙模芯組合模具、流道、渣包排布部確定性的壓鑄坯件進行簡單的流道與產品、渣包分離、真正做到換模不用調機。

-分離作業過程中、產品一次性完成分離且不與設備任何夾具接觸、能夠保護產品的完整性。

-來料檢測利用新一代技術、阻攔短路的檢測方式、定位更精準、解決了采用光纖檢測方式、光纖器件脆弱性易順懷、多故障的問題。

適應范圍：適應于通訊、電子、玩具、家居、箱包等五金壓鑄產品的配套自動水口分離及聯機生產應用。

-The fully automatic die-casting and die-casting water outlet machine belongs to the subsequent automated processing water outlet process equipment produced by the hardware zinc alloy die-casting machine. The mechanical characteristics of the product are as follows:

-Adopting single ultrasonic operation, it is suitable for fixed die-casting billets with independent molds, flow channels, and slag ladle arrangement. It can separate products and slag ladles in one go without damage, and there is no need to adjust the machine when changing the mold.

-This equipment is also suitable for simple separation of flow channels from products and slag packages in die-casting billets with multiple die cores, flow channels, and deterministic slag package layout. It can also choose to break the punch line into the material inlet and then pass, solving the problem of difficult product separation due to the hard inlet.

高盛-高必盛工廠廠房和生產車間展示

壓鑄自動化設備主營產品展示

噴霧取件機、輸送線及全自動水口分離機展示