| MODEL | ATC-1000 | ATC-1100 | ATC-1200 | ATC-1300 |
|---|
| Machining Capability | Distance Between Centers | 2000/ 3000/ 4000/ 5000/ 6000/ 7000/ 8000/ 9000/ 10000mm |
|---|
| Swing Over Bed | 1000 mm | 1100 mm | 1200 mm | 1300 mm |
| Swing Over Gap | 1300x600 | 1400x600 | 1500x600 | 1600x600 |
| Main Spindle | Spindle Nose | A2-11, 165mm : L 20~110, M 110~320, H 320~660rpm |
|---|
| Spindle Bore | A2-15, 230mm : L 20~110, M 110~320, H 320~660rpm |
| Spindle Speed (rpm) | A2-20, 310mm : L 20~100, M 100~200, H 200~400rpm |
| A2-28, 410mm : L 20~80, M 80~150, H 150-250rpm |
| Travel | X Axis | 620mm | 620mm | 620mm | 620mm |
|---|
| Y Axis (Optional) | + 150mm | + 200mm | + 250mm | + 250mm |
| Z Axis | 2080/3080/ 4080/ 5080/ 6080/ 7080/ 8080/ 9080/ 10080mm |
| Feeds | X Axis Rapid Traverse | 15M/min |
|---|
| Y Axis Rapid Traverse (Optional) | 6M/min |
| Z Axis Rapid Traverse | 15M/min |
| Cutting Feed Rate | 0.001-500mm/rev (0.0004"-20"/rev) |
| Motors | Main Motor | Spindle Motor 37kw |
|---|
| X Axis Servo Motor | AC Servo Motor 7.0kw, 30Nm |
| Y Axis Servo Motor (Opt) | AC Servo Motor 7.0kw, 30Nm, ABS |
| Z Axis Servo Motor | AC Servo Motor 6.0kw, 38Nm |
| Lubrication Pump | 100W |
| Coolant Pump | 450W, 6~10 bar |
| Hydraulic Tank Pump (Optional) | 5hp (3.7kw) |
| Tank Capacity | Hydraulic Tank (Optional) | 70L |
|---|
| Lubrication Pump | 2L |
| Coolant Tank | 100L |
| Ball Screw | X Axis Diameter | 40mm / pitch 10 |
|---|
| Y Axis Diameter | 40mm / pitch 10 |
| Z Axis Diameter | 63mm / pitch 10 |
| Tailstock | Quill Diameter | 160mm / A2-8 250mm (opt) |
|---|
| Quill Travel | 200mm |
| Quill Taper | MT6 |
| Length | 5340/6340/7340/8340/9340/10340/11340/12340/13340mm |
|---|
| Height | 3000mm |
|---|
| Width | 3000mm |
|---|
| N.W (kg) | 20000/22000/ 25000/ 28000/ 31000/ 34000/ 37000/ 40000/ 43000 |
|---|
機床商務網
機床商務網