機床商務網
詳細介紹
| MODEL | DY-1100VS | DY-1200VS | DY-1300VS | DY-1400VS | DY-1500VS | |
|---|---|---|---|---|---|---|
| SWING | Distance Between Centers | 1500 / 2000 / 3000 / 4000 / 5000 / 6000 / 7000 / 8000 / 9000 / 10000 / 11000 / 12000 / 13000 / 14000 / 15000 / 16000 / 17000 / 18000 / 19000 / 20000 / 21000 / 22000 / 23000 / 24000 / 25000 MM | ||||
| Height of Center (Over Bed) | 550 mm | 600 mm | 650 mm | 700 mm | 750 mm | |
| Swing Over Bed | 1100 mm | 1200 mm | 1300 mm | 1400 mm | 1500 mm | |
| Swing Over Cross Slide | 730 mm | 830 mm | 930 mm | 1030 mm | 1130 mm | |
| Swing Over Gap | 1600 x 750 | 1700 x 750 | 1800 x 750 | 1900 x 750 | 2000 x 750 | |
| BED | Width | 692 mm | ||||
| HEADSTOCK | Spindle Nose | A2-11 ISO | A2-15 ISO | A2-20 ISO | A2-20 ISO | A2-28 ISO |
| Spindle Bore | 165 mm | 230 mm | 305 mm | 360 mm | 410 mm | |
| Spindle Speed (rpm) | L: 20 ~ 110rpm, M: 110 ~ 320rpm, H: 320 ~ 660rpm | L: 20 ~ 110rpm, M: 110 ~ 320rpm, H: 320 ~ 660rpm | L: 20 ~ 110rpm, M: 110 ~ 200rpm, H: 200 ~ 400rpm | L: 20 ~ 100rpm, M: 100 ~ 200rpm, H: 200 ~ 300rpm | L: 20 ~ 100rpm, M: 100 ~ 200rpm, H: 200 ~ 250rpm | |
| Number of Spindle Speed | ||||||
| FEEDS - THREAD | Leadscrew | Ø58 mm. 2T.P.I. or 12 pitch | ||||
| Longitudinal Feed Range | 0.0100 ~ 1.4145 mm/rev | |||||
| Cross Feed Range | 0.0102 ~ 0.5735 mm/rev | |||||
| Inch Threads | 35 Kinds, 1 ~ 59 T.P.I | |||||
| Metric Threads | 34 Kinds, 0.5 ~ 18mm | |||||
| TOOL SLIDE | Cross Slide Travel | 750 mm | ||||
| Compound rest travel | 350 mm | |||||
| TAILSTOCK | Quill Travel | 350 mm | ||||
| Quill Diameter | 125 mm / 180 mm (Opt.) | |||||
| Taper of Center | MT#6 | |||||
| MOTOR | Main Motor | 40HP(Sta)/ 50 HP(Opt) | ||||
| Rapid Feed Motor | 1/2 HP | |||||
| Coolant Pump | 1/2 HP | |||||
| Length (mm) | 4000 / 4500 / 5500 / 6500 / 7500 / 8500 / 9500 / 10500 / 11500 / 12500 / 13500 / 14500 / 15500 / 16500 / 17500 / 18500 / 19500 / 20500 / 21500 / 22500 / 23500 / 24500 / 25500 / 26500 / 27500 | |||||
| Width (mm) | 2100mm | |||||
| Height (mm) | 1900 | 2000 | 2100 | 2200 | 2300 | |
| N.W (kg) | 8750 / 9500 / 11000 / 12500 / 14000 / 15500 / 17000 / 18500 / 20000 / 21500 / 23000 / 24500 / 26000 / 27500 / 29000 / 30500 / 32000 / 33500 / 35000 / 36500 / 38000 / 39500 / 41000 / 42500 / 44000 | |||||
| Workpiece Weight capacity | Chuck only | Chuck + Tailstock | Chuck + 1 Steady rest + Tailstock | Chuck + 2 Steady rest + Tailstock | |||
|---|---|---|---|---|---|---|---|
| Spindle bore 165mm | 1500kg | 5000kg | 8000kg | 12000kg | |||
| Spindle bore 230-410mm | 1900kg | 5400kg | 8400kg | 12400kg | |||
| * Above specifications are subject to change without notice. Special requirement please connect with us. | |||||||
機床商務網