機床商務網
詳細介紹
| MODEL | DY-1100G | DY-1200G | DY-1300G | DY-1400G | DY-1500G | ||
|---|---|---|---|---|---|---|---|
| SWING | Distance Between Centers | 1500/2000/2500/3000/4000/5000/6000/7000/8000/9000/10000/ 11000/12000/13000/14000/15000/16000/17000/18000/19000/20000/ 21000/22000/23000/24000/25000mm | |||||
| Height of Center (Over Bed) | 550mm | 600 mm | 650 mm | 700 mm | 750 mm | ||
| Swing Over Bed | 1100 mm | 1200 mm | 1300 mm | 1400 mm | 1500 mm | ||
| Swing Over Cross Slide | 730mm | 830 mm | 930 mm | 1030 mm | 1130 mm | ||
| Swing Over Gap | 1600x750 | 1700x750 | 1800x750 | 1900x750 | 2000x750 | ||
| BED | Width | 692mm | |||||
| HEADSTOCK | Spindle Nose | ISO A2-11 / A2-15 / A2-20 / A2-28 153mm(STA.) / 230mm(OPT.) / 310 / 360mm(OPT.) / 410mm(OPT.) | |||||
| Spindle Bore | |||||||
| Spindle Speed (rpm) | 3~420rpm | ||||||
| Number of Spindle Speed | 12 steps | ||||||
| FEEDS - THREAD | Leadscrew | Ø58 mm. 2T.P.I. or 12 pitch | |||||
| Longitudinal Feed Range | 0.0100 ~ 1.4145 mm/rev | ||||||
| Cross Feed Range | 0.0102 ~ 0.5735 mm/rev | ||||||
| Inch Threads | 35 Kinds, 1 ~ 59 T.P.I | ||||||
| Metric Threads | 34 kinds, 0.5~18mm | ||||||
| TOOL SLIDE | Cross Slide Travel | 750 mm | |||||
| Compound Rest Travel | 350 mm | ||||||
| TAILSTOCK | Quill Travel | 350 mm | |||||
| Quill Diameter | 125mm / 180mm (OPT.) | ||||||
| Taper of Center | MT#6 | ||||||
| MOTOR | Main Motor | 40HP X 4P / 50HP X 4P(OPT.) | |||||
| Rapid Feed Motor | 1/2 HP | ||||||
| Coolant Pump | 1/2 HP | ||||||
| Length (mm) | 4000/4500/5000/5500/6500/7500/8500/9500/10500/11500/12500/13500/14500/15500 16500/17500/18500/19500/20500/21500/22500/23500/24500/25500/26500/27500 | ||||||
| Width (mm) | 2100 | ||||||
| Height (mm) | 1900 | 2000 | 2100 | 2200 | 2300 | ||
| N.W (kg) | 8750/9500/10250/11000/12500/14000/15500/17000/18500/20000/21500/23000/24500/26000 27500/29000/30500/32000/33500/35000/36500/38000/39500/41000/42500/44000 | ||||||
| Workpiece Weight Capacity | Chuck only | Chuck + Tailstock | Chuck + 1 Steady rest +Tailstock | Chuck + 2 Steady rest + Tailstock | |||
|---|---|---|---|---|---|---|---|
| Spindle bore 153mm | 1500kg | 5000kg | 8000kg | 12000kg | |||
| Spindle bore 230-410mm | 1900kg | 5400kg | 8400kg | 12400kg | |||
| * Above specifications are subject to change without notice. Special requirement please connect with us. | |||||||
機床商務網