機床商務(wù)網(wǎng)
詳細介紹
| MODEL | DY-680G | DY-780G | DY-880G | DY-980G | ||
|---|---|---|---|---|---|---|
| SWING | Distance Between Centers | 1100 / 1600 / 2000 / 2500 / 3000 / 3500 / 4000 / 5000 / 6000 / 7000 / 8000 / 9000 / 10000 mm | ||||
| Swing Over Bed | 680 mm | 780 mm | 880 mm | 980 mm | ||
| Swing Over Cross Slide | 440 mm | 540 mm | 640 mm | 740 mm | ||
Over gap swing (mm) | 970 x 482 | 1070 x 482 | 1170 x 482 | 1270 x 482 | ||
| Height of Center (Over Bed) | 340 mm | 390 mm | 440 mm | 490 mm | ||
| BED | Width | 458 mm | ||||
| HEADSTOCK | Spindle Nose | A2-11 or D1-11 / A2-11 or D1-11 / A2-15 | ||||
| Spindle Bore | 105 mm(Sta)/ 155 mm (Opt.) / 230 mm ( Opt for 880/980) | |||||
| Spindle Speed (rpm) | 15, 24, 32, 45, 60, 95, 130, 180, 340, 530, 720, 1000 / 14, 22, 30, 40, 50, 80, 110, 150, 280, 430, 600, 800 / 5, 9, 14, 17, 26, 41, 60, 140, 190, 290, 450 / | |||||
| Number of Spindle Speed | 12 steps | |||||
| FEEDS - THREAD | Leadscrew | Ø45 mm. 2T.P.I. or 6 pitch | ||||
| Number of Feed Changes | 36 | |||||
| Longitudinal Feed Range | 0.05 ~ 0.70 mm/rev | |||||
| Cross Feed Range | 0.025 ~ 0.35 mm/rev | |||||
| Inch Threads | 2~28 T.P.I, (36 Kinds) | |||||
| Metric Threads | P0.8~14mm, (65 Kinds) | |||||
| D.P. No. / range | D.P 4~56 (36 Kinds) | |||||
| Module Pitches No. / Range | MOD 0.5~7 (22 Kinds) | |||||
| TOOL SLIDE | Cross Slide Travel | 340 mm | 390 mm | 440 mm | 490 mm | |
| Compound Rest Travel | 240 mm | |||||
| TAILSTOCK | Quill Travel | 180 mm | ||||
| Quill Diameter | 105 mm | |||||
| Taper of Center | MT#6 | |||||
| MOTOR | Main Motor | 15 HP / 4P, 20 HP / 4P (Opt) | ||||
| Rapid Feed Motor | 1/4 HP | |||||
| Coolant Pump | 1/8 HP | |||||
| Length (mm) | 2700 / 3200 / 3700 / 4200 / 4700 / 5200 / 5700 / 6700 / 7700 / 8700 / 9700 / 10700 / 11700 | |||||
| Width (mm) | 1240 | |||||
| Height (mm) | 1400 | 1450 | 1500 | 1550 | ||
| N.W (kg) | 3300 / 3600 / 3900 / 4200 / 4500 / 4800 / 5100 / 6100 / 7200 / 8300 / 9500 / 10700 / 11900 | |||||
| Workpiece Weight Capacity | Chuck only | Chuck + Tailstock | Chuck + 1 Steady rest + Tailstock | Chuck + 2 Steady rest + Tailstock | |||
|---|---|---|---|---|---|---|---|
| Spindle bore 105mm | 600kg | 1700kg | 2700kg | 4000kg | |||
| Spindle bore 155mm | 1000kg | 2000kg | 3000kg | 5000kg | |||
| Spindle bore 230mm | 1400kg | 2400kg | 3400kg | 5400kg | |||
| * Above specifications are subject to change without notice. Special requirement please connect with us. | |||||||
機床商務(wù)網(wǎng)