| MODEL | DY-410GB | DY-410G | DY-460G | DY-510G |
|---|
| Swing | Distance between centers | 1000 / 1500 | 1100 / 1600 / 2100 / 3100 mm |
|---|
| Swing over bed | 410mm | 410mm | 460mm | 510mm |
| Swing over cross slide | 230mm | 230mm | 270mm | 320mm |
| Swing over gap | 660mm | 660mm | 710mm | 760mm |
| Height of center (over bed) | 205mm | 205mm | 230mm | 255mm |
| Bed | Bed Width | 305mm | 330mm |
|---|
| Headstock | Spindle nose Spindle bore | D1-6 54mm | D1-6 63mm | D1-6: 63mm D1-8: 80mm / 102mm(Opt.) |
|---|
| Spindle speed (rpm) | 75~2000rpm | D1-6: 36~2000 rpm / D1-8: 36~1500rpm |
| Number of spindle speed | 8 Change | 12 Change |
| Feeds- Thread | Leadscrew | Ø35 mm. 4T.P.I. or 6 pitch |
|---|
| Number of feed changes | 32 |
| Longitudinal feed range | 0.04~1.0 mm/rev |
| Cross feed range | With rapid traverse: 0.02~0.5mm/rev Without rapid traverse: 0.04~1.0mm/rev |
| Inch threads | 37 Kinds 2~56 T.P.I. |
| Metric threads | 41 Kinds P0.2~14 |
| D.P. No. / range | 19 Kinds D.P 8~44 |
| Module pitches No. / range | 18 Kinds M 0.3~3.5 |
| Tool slide | Cross slide travel | 240mm | 260 mm |
|---|
| Compound rest travel | 95mm | 127 mm |
| Tailstock | Quill travel | 120mm | 130mm |
|---|
| Quill diameter | 65mm | 75mm |
| Taper of center | MT4 | MT5 |
| Motor | Main motor | 5HP | 7.5HP / 10HP(OPT) |
|---|
| Coolant pump | 1/8HP | 1/8HP |
機床商務網
機床商務網