機床商務網(wǎng)
詳細介紹
| MODEL | DY-350C | DY-410C | DY-510C | |
|---|---|---|---|---|
| Machining Capability | Distance Between Centers | 1000 mm | 1250 / 1500 / 2000 / 3000 mm | |
| Swing Over Bed | 410 mm | 410 mm | 510 mm | |
| Swing Over Cross Slide | 200 mm | 200 mm | 300 mm | |
| Bed | Width | 305 mm (12") | 330 mm (13") | |
| Main Spindle | Spindle Nose | D1-6 | D1-8 | |
| Spindle Bore | 54 mm | 80 or 102 (Opt.) mm | ||
| Spindle Speed (rpm) | H: 600 - 3000 M: 200 - 1300 L: 50 - 450 | H: 140 - 2500 (bore102: 1800 rpm) M: 50 - 850 L: 30 - 300 | ||
| Spindle Taper | MT6 | MT8 / MT10 | ||
| Travel | Cross Travel (X Axis) | 180 mm | 200 mm | |
| Longitudinal Travel (Z Axis) | 750 / 1250 mm | 950 / 1200 / 1700 mm | ||
| Feeds | X Axis Rapid Traverse | 5 M/min | ||
| Z Axis Rapid Traverse | 7.5 M/min | |||
| Cutting Feed Rate | 0.001 - 500 mm/rev (0.0004" - 20"/rev) | |||
| Motors | Main Motor | 7.5 hp | 10 hp | |
| Inverter | 7.5 hp | 10 hp | ||
| X Axis Servo Motor | Siemens or Fanuc or Fagor AV servo motor FXM33 / 1.53 kw / 7.3 Nm / 2000 rpm | |||
| Z Axis Servo Motor | Siemens or Fanuc or Fagor AV servo motor FXM53 / 2.49 kw / 11.9 Nm / 2000 rpm | |||
| Oil Pump | 80 W | |||
| Coolant Pump | 1/8 Hp | |||
| Hydraulic Tank Pump (Optional) | 2 Hp (1.5 kw) | |||
| Tank Capacity | Hydraulic Tank (Optional) | 20 L | ||
| Lubrication Pump | 2 L | |||
| Coolant Tank | 90 L | |||
| Ball Screw | X Axis Diameter | 25 mm / pitch 5 | ||
| Z Axis Diameter | 40 mm / pitch 5 | |||
| Tailstock | Quill Diameter | 54 mm | 75 mm | |
| Quill Travel | 130 mm | 150 mm | ||
| Quill Taper | MT4 | MT5 | ||
| Measurement (Approx.) (kg) | Net Weight | 2000 / 2200 | 2400 / 2600 / 3150 / 4250 | |
| Gross Weight | 2200 / 2450 | 2600 / 2850 / 3450 / 4650 | ||
| * Above specifications are subject to change without notice. Special requirement please connect with us. | ||||
機床商務網(wǎng)