機床商務網
詳細介紹
分類：車用齒輪油 商用車用油
Mobilube GX-A 80W
Automotive Gear Lubricant
Product Description
Mobilube GX-A 80W is an automotive gear lubricant formulated from high performance base oils and an advanced additive system. This lubricant is engineered for commercial transmissions, axles, and final drives where protection against wear and scoring is required. It is recommended by ExxonMobil for use in Mercedes Benz applications where MB-Approval 235.1 is required and in applications where API GL-4 service is required.
Features and Benefits
Today's drivetrain applications place higher performance demands on lubricants. Higher speeds, higher torque, and heavier loads require improved formulations to maximise equipment life and optimise operating costs. Longer service intervals place additional demands on the gear lubricant requiring effective basestock and additive systems. Mobilube GX-A 80W is engineered to meet these challenges. The key benefits include:
| Features | Advantages and Potential Benefits |
|---|---|
| Good thermal stability and resistance to high temperature oxidation | Long gear and bearing life due to minimal deposits Long seal life |
| Excellent rust and corrosion protection | Long component life |
| Good low temperature lubrication | Reduced wear at start-up and ease of start-up |
| Compatible with typical automotive seals and gaskets | Minimum leakage and reduced contamination |
Applications
Recommended by ExxonMobil for use in:
- Manual transmissions and drive axles requiring API GL-4 level performance
- Passenger cars, onhighway light and heavy-duty trucks and commercial vehicles
- Off-highway industries including: construction, quarrying, and agriculture
- Other industrial, commercial, and automotive applications including hypoid gears operating under moderate to severe operating conditions
Specifications and Approvals
| Mobilube GX-A 80W meets or exceeds the requirements of the following industry and builder specifications: | |
|---|---|
| ZF TE-ML 08 | X |
| Mobilube GX-A 80W has the following builder approvals: | |
|---|---|
| MB-Approval 235.1 | X |
| MAN 341 Typ E1 | X |
| MAN 341 Typ Z2 | X |
| ZF TE-ML 02B/17A | X |
| Mobilube GX-A 80W is recommended by ExxonMobil for use in applications requiring: | |
|---|---|
| API GL-4 | X |
| ZF TE-ML 02A | X |
| MAN 341 Typ Z1 | X |
Typical Properties
| Mobilube GX-A 80W | |
|---|---|
| SAE Grade | 80W |
| Viscosity, ASTM D 445 | |
| cSt @ 40ºC | 76 |
| cSt @ 100ºC | 10.0 |
| Viscosity Index, ASTM D 2270 | 104 |
| Pour Point, ºC, ASTM D 97 | -30 |
| Flash Point, ºC, ASTM D 92 | 216 |
| Density @ 15ºC kg/l, ASTM D 4052 | 0.89 |
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
機床商務網