機床商務網
詳細介紹
| Description | S20 | S20B | S20CS | S20CSB | S32 | S32B | S32CS | S32CSB |
| Working Range | ||||||||
| Max. turning dia. | 20 mm | 33 mm | ||||||
| Max. turning length. | 250 mm | |||||||
| Max. drilling dia. | 14 mm | 26 mm | ||||||
| Max. tapping dia. | M10 | M12 | ||||||
| Center height | 960 mm | |||||||
| O.D. Tooling | ||||||||
| Number of tools | 6 | 5 | ||||||
| Dimension | 12 x 12 x 100 | 16 x 16 x 120 | ||||||
| L.D. Tooling | ||||||||
| Number of tools | 4 | |||||||
| Dimension | 10 mm (ER16) | 13 mm (ER20) | ||||||
| Cross working driven tooling | ||||||||
| Number of tools | - | 6 | - | 6 | ||||
| Dimension | - | 10 mm (ER16) | - | 13 mm (ER20) | ||||
| Cross spindle speed | - | 200-6000 rpm | - | 200-6000 rpm | ||||
| Front working driven tooling | ||||||||
| Number of tools | - | 3 | - | 3 | ||||
| Dimension | - | 10 mm (ER16) | - | 13 mm (ER20) | ||||
| Spindle speed | - | 6000 rpm | - | 6000 rpm | ||||
| Back I.D. Tooling | ||||||||
| Number of tools | - | 4 | - | 4 | - | 4 | - | 4 |
| Dimension | - | 10 mm (ER16) | - | 10 mm (ER16) | - | 13 mm (ER20) | - | 13 mm (ER20) |
| Back working driven tooling | ||||||||
| Number of tools | - | 3 | - | 3 | ||||
| Dimension | - | 7 mm (ER11) | - | 10 mm (ER16) | ||||
| Spindle Speed (X-axis) | - | 6000 rpm | - | 6000 rpm | ||||
| Spindle | ||||||||
| Spindle hole dia. | 21 mm | 36 mm | ||||||
| Spindle Speed | 200-10000 rpm | 200-8000 rpm | ||||||
| Back spindle | ||||||||
| Back spindle hole dia. | - | 21 mm | - | 21 mm | - | 33 mm | - | 33 mm |
| Back spindle speed | - | 7500 rpm | - | 7500 rpm | - | 6000 rpm | - | 6000 rpm |
| Max. length for fornt ejection | - | 80 mm | - | 80 mm | - | 80 mm | - | 80 mm |
| Rapid speed | 18 M/min | |||||||
*The Specifications are subject to change without prior notice.
6 Cross Working Driven Tools
(Cross side drilling / milling / tapping)
6 O.D Turning Tools
3 Front Working Driven Tools
(Front eccentric drilling / tapping)
4 I.D. Stationary Tools
Tool Post
Standard Accessories
- Spindle 5" indexing
- Part off detective sensor
- Coolant system
- Work light
- Part catcher
- Fixed bushing
- Living bushing(For S20CS/S20CSB)
- Cross working driven tool(For S20CS/S20CSB)
- Back spindle(For S20B/S20CSB)
- Front working driven tool(For S20CSB)
- Back working driven tool(For S20CSB)
Options
- Living bushing(For S20/S20B)
- Front working driven tool(For S20CS)
- CF axis(For S20CS/S20CSB)
- Rough material bushing (Max. Machining = Bar diameter x 3)
- Chip conveyor / chip bucket
機床商務網