機床商務網
詳細介紹
- 每支 FMA 面銑刀桿均附有螺絲及擋耳以裝配面銑刀盤使用
- 請于訂購時，確認刀桿為英制或公制
- 面銑刀盤為另購品
| 型號 | D | D1 | D2 | L | L1 | W | H | G | 公/英制 牙 |
|---|---|---|---|---|---|---|---|---|---|
| NT40 FMA25.4-L | 25.4 | 60 | 33 | 50/75 100 | 20 | 9.5 | 13 | M12 | 5/8"-11 M16x2.0P |
| NT40 FMA31.75-L | 31.75 | 70 | 40 | 22 | 12.7 | 13.5 | M12 | ||
| NT40 FMA38.1-L | 38.1 | 85 | 50 | 23 | 15.9 | 15 | M16 | ||
| NT40 FMA50.8-L | 50.8 | 95 | 65 | 24 | 19.05 | 16 | M16 | ||
| NT50 FMA25.4-L | 25.4 | 60 | 33 | 50/75 100/125 150/200 300 | 20 | 9.5 | 13 | M12 | 1"-8 M24x3.0P |
| NT50 FMA31.75-L | 31.75 | 70 | 40 | 22 | 12.7 | 13.5 | M12 | ||
| NT50 FMA38.1-L | 38.1 | 85 | 50 | 23 | 15.9 | 15 | M16 | ||
| NT50 FMA50.8-L | 50.8 | 95 | 65 | 24 | 19.05 | 16 | M16 | ||
| NT50 FMA47.625-L | 47.625 | 128.57 | - | 32 | 25.4 | - | - |
Unit: mm
機床商務網