機床商務網
詳細介紹
| 主要規格和技術參數 | |
| 車削 | AT320 |
| 機身上工件回轉直徑 | 320mm |
| 工件長度 | 750mm |
| 刀架上回轉直徑 | 200mm |
| 主軸通孔直徑 | 38mm |
| 主軸孔莫氏錐度 | NO.5 |
| 刀架橫向行程 | 150mm |
| 小刀架縱向行程 | 100mm |
| 加工公制螺紋種數 | 21 |
| 加工公制螺紋螺距 | 0.45-6mm |
| 加工英制螺紋種數 | 28 |
| 加工英制螺紋螺距 | 5-48 1/n" |
| 主軸每轉刀架的縱向進給量 | 0.01-1.5/r |
| 主軸每轉刀架的橫向進給量 | 0.025-0.34/r |
| 尾架套筒的移動量 | 80mm |
| 尾架內孔莫氏錐度 | NO.3 |
| 主軸轉速級數 | 12 |
| 主軸轉速范圍 | 60-1600r/min |
| 電機 | 1.1kw |
| 鉆銑削 | AT320 |
| 鉆孔直徑 | 16mm |
| 鉆銑頭箱繞立柱回轉角度 | 360 |
| 主軸轉速級數 | 4 |
| 主軸轉速范圍 | 260-2620r/min |
| 主軸孔莫氏錐度 | No.3 or R8 |
| 電機 | 0.37kw |
| 其他 | |
| 凈重 | 400kg |
| 外形尺寸 | 1540*625*1750 |
Features
◆ Compact,versatile combination machine.
◆ Adjustable height drill/mill head increases capacity.
◆ Large MT5 spindle bore.
◆ Large distance between center on longitudinal.
◆ Fine feed handle and clutch for precision milling.
◆ Headstock provides two step of feeds.
◆ Spindle is supported by high precision bearing.
◆ Headstock is constantly oiled during operation.
◆ T-slot cross slide.
◆ Adjustable gibs for the slideway.
◆ Power longitudinal & cross feed.
◆ Gearbox gets left and right hａnd threads to cut.
◆ High precision chuck.
◆ Equipped with emergency stop button.
◆ A reversion switch is included for added versatility.
◆ Tailstock may be offset for turning taper.
◆ with the added control rod, it is easier to handle.
Gear drive power for lathe
It has 12-garde spindle gearshift for cutting, large spindle holes and large chuck
Threading Dial & Half Nut
It can be realized power feed on longitudinal or crosswise.
cut and chase threads like a master machinist. you can cut right and left-hａnd threads in metric and inch. with the added control rod, it is easier to handle.
Bi-directional power-feed
No stop to realized the functions of positive and negative on the lathe. leadscrew & crossfeed screw on both lathe and mill-yield finishes,highest quality work.
Gear drive power for mill & drill-It has 4 gearshift for drilling and milling. the drilling and milling head can work with angle changed ?
Induction hardened, precision ground V-way bed
Quick Changeover & Two separate motors
Bigger mill clearance allows room for both lathe and mill setups without removing the lathe chuck. this machine is multi-purpose machine tool of bench type, it
is mainly used to lathe,drill and mill. which controlled by two motor
STANDARD ACCESSORIES
1. 3-jaw chuck
2. dead center
3. allen wrench
4. double open end wrench
5. chuck wrench
6. change gear
7. drill chuck
8. machine base
SPECIAL ACCESSORIES
1. turning tool set
2. steady rest
3. follow rest
4. machine vice
5. face mill cutter
6. face plate
7. back plate(φ160/φ200)
8. four-jaw chuck(φ160/φ200)
9. step block
10. rolling center
◆ Compact,versatile combination machine.
◆ Adjustable height drill/mill head increases capacity.
◆ Large MT5 spindle bore.
◆ Large distance between center on longitudinal.
◆ Fine feed handle and clutch for precision milling.
◆ Headstock provides two step of feeds.
◆ Spindle is supported by high precision bearing.
◆ Headstock is constantly oiled during operation.
◆ T-slot cross slide.
◆ Adjustable gibs for the slideway.
◆ Power longitudinal & cross feed.
◆ Gearbox gets left and right hａnd threads to cut.
◆ High precision chuck.
◆ Equipped with emergency stop button.
◆ A reversion switch is included for added versatility.
◆ Tailstock may be offset for turning taper.
◆ with the added control rod, it is easier to handle.
Gear drive power for lathe
It has 12-garde spindle gearshift for cutting, large spindle holes and large chuck
Threading Dial & Half Nut
It can be realized power feed on longitudinal or crosswise.
cut and chase threads like a master machinist. you can cut right and left-hａnd threads in metric and inch. with the added control rod, it is easier to handle.
Bi-directional power-feed
No stop to realized the functions of positive and negative on the lathe. leadscrew & crossfeed screw on both lathe and mill-yield finishes,highest quality work.
Gear drive power for mill & drill-It has 4 gearshift for drilling and milling. the drilling and milling head can work with angle changed ?
Induction hardened, precision ground V-way bed
Quick Changeover & Two separate motors
Bigger mill clearance allows room for both lathe and mill setups without removing the lathe chuck. this machine is multi-purpose machine tool of bench type, it
is mainly used to lathe,drill and mill. which controlled by two motor
STANDARD ACCESSORIES
1. 3-jaw chuck
2. dead center
3. allen wrench
4. double open end wrench
5. chuck wrench
6. change gear
7. drill chuck
8. machine base
SPECIAL ACCESSORIES
1. turning tool set
2. steady rest
3. follow rest
4. machine vice
5. face mill cutter
6. face plate
7. back plate(φ160/φ200)
8. four-jaw chuck(φ160/φ200)
9. step block
10. rolling center
機床商務網