POWER CHUCK TOPLUS托普勒司夾頭

灰塵、細屑或任何臟污都會造成加工上的阻礙，至少這是使用傳統(tǒng)夾頭時會發(fā)生的狀況，但托普勒司夾頭可不是這么一回事。不同于夾頭本體的錐面，托普勒司夾頭由六個圓錐形鋼片搭配礦物聚合物形成三角錐幾何形狀。一如夾頭，夾固頭有外六角面，可緊密組裝入并貼合夾頭內(nèi)面。這表示夾頭幾乎可將臟污全部隔絕于外。另若需要潤滑， 則可使用單潤滑噴頭。由于表面壓力的減少與夾持面間的全部密合， 使得托普勒司夾頭徑向夾持力高于SPANNTOP整整25%。因此托普勒司更適用于素材工件、熔鑄件或鍛造件夾持。托普勒司夾頭相較于一般鐵制夾頭在重量上也減少很多，因此有較低的總慣性扭矩， 特別有利于高速加工。夾頭本身的材料也有緩震的特性。托普勒司夾頭非常適用于重加工與干切削。

MAXIMUM HOLDING POWER
Up to 25 % more holding power and higher output – with the same clamping cylinder that is used to actuate our SPANNTOP chucks. The pyramid arrangement of glide surfaces makes it possible. The clamping head rests with full-surface contact in the TOPlus chuck body – even with large workpiece tolerances. In addition this geometry ensures that TOPlus is significantly less sensitive to contamination than previous chuck/clamping head solutions, and with a concentric precision of approx. 0.015 mm [for chuck size 65]!
Equipped for the Future
Thus TOPlus is even better suited for raw material, cast and forged parts, as well as fine-particle non-ferrous metals such as brass. Therefore, all-round optimized values make the chuck an ideal partner for modern manufacturing strategies and state-of-the-art machine tools.
TOPlus chuck – simply revolutionary!
Key advantages
● 25 % higher holding power than SPANNTOP
●Unequalled rigidity due to full-surface contact of the clamping segments
● No radial displacement between clamping head and chuck body, therefore it is resistant to contamination
● Concentric precision < 0.015 mm possible
●Absorbs vibration