色偷偷噜噜噜亚洲男人,久久久国产一区二区三区,人妻夜夜爽天天爽三区麻豆av网站

參考價	面議

詳細介紹

Slim, Space-saving, 4-point Unit Relay

RT-3 Unit relay

4-point Terminal
[PA relay, PhotoMOS Power
Voltage sensitive type]

Mountable relay PA relay

PhotoMOS Power
Voltage sensitive type

Not currently certified by any standards

Features

1.Slim, space-saving type (33 mm 1.299 inch wide) with four independent points on a base measuring 33 × 67 mm 1.299 × 2.638 inch. This contributes to a more compact control panel.

2.PA relays, which have high sensitivity Au clad twin contacts, are installed.

PA relays, 5 mm .197 inch wide, are installed.
The PA relays feature high sensitivity (12 V type: 120 mW, 24 V type: 180 mW) and twin contacts with Au-cladding, which combine to ensure high reliability even with minute loads.

3.Can be mounted on a DIN rail or mounted directly (by screw).

4.Equipped with an LED display to allow easy confirmation of operation.

5.Possible to select relay for use in the 4-point terminal in accordance with load.

Rating/ Performance

1.RT-3 Unit relay

1. Input ratings (per PA relay)

Part No.	Rated input voltage	Input current (at rated input voltage, 20°C 68℉) (approx.)	Allowable variation of rated input voltage (-20 to +55°C - 4 to +131℉)
RT3S-12V	12 V DC	11.5 mA (Relay 10 mA + LED 1.5 mA)	12 V DC ± 10%
RT3S-24V	24 V DC	10.5 mA (Relay 7.5 mA + LED 3 mA)	24 V DC ± 10%

2. PA Relay coil specifications (reference value)

Relay part No.	Pick-up voltage (Initial) (at 20°C 68℉)	Drop-out voltage (Initial) (at 20°C 68℉)	Coil resistance (±10%) (at 20°C 68℉)	Nominal operating power
PA1a-12V	70%V or less of nominal voltage	5%V or more of nominal voltage	1,200 Ω	120 mW
PA1a-24V	70%V or less of nominal voltage	5%V or more of nominal voltage	3,200 Ω	180 mW

3. Output ratings (per PA relay)

Specification	Item	Specifications
Contact rating	Rated control capacity (resistive load)	3 A 250 V AC, 3 A 30 V DC
	Maximum allowable contact power (resistive load)	750 VA (AC), 90 W (DC)
	Maximum allowable contact voltage	250 V AC, 30 V DC
	Maximum allowable contact current	3 A
	Minimum load (reference value)	100 mV 100 μA
Expected life	Electrical (resistive load)	Min. 3 × 10⁴: 3 A 250V AC Min. 3 × 10⁴: 3 A 30V DC Min. 10⁵: 2 A 250V AC Min. 10⁵: 2 A 30V DC
Expected life	Mechanical	Min. 2 × 10⁷ (at 180times/min.)

*	During 4-point simultaneous operation, the rating per point is also as shown above.

2.4-point Terminal

1. Input ratings (per relay)

Rated input voltage	Allowable variation of rated input voltage	Allowable input current
12, 24 V DC	12 V DC ±10%, 24 V DC ±10%	0.2A

*	The input voltage value above is the allowable current when no relay is installed. Please note that input voltage is determined by the type of relay installed.

2. Input rating when PA relay installed (per relay, at 20°C 68°F)

Type	Rated voltage input	Operate voltage (Initial)	Release voltage (Initial)	Input current (during application of rated input voltage)
PA1a-12V	12 V DC	Max. 9.5V DC (Relay max. 8.4V + include diode max. 1.1V)	Min. 1.0V DC (Relay min. 0.6V + include diode min. 0.4V)	Approx. 11.5mA (Relay 10mA + LED 1.5mA)
PA1a-24V	24 V DC	Max. 17.9V DC (Relay max. 16.8V + include diode max. 1.1V)	Min. 1.6V DC (Relay min. 1.2V + include diode min. 0.4V)	Approx. 10.5mA (Relay 7.5mA + LED 3mA)

3. Input rating when PhotoMOS Power voltage sensitive type installed (per relay, at 25°C 77°F)

Type	Rated voltage input	Operate voltage (Initial)	Release voltage (Initial)	Input current (during application of rated input voltage)
AQZ0D	12, 24V DC	Max. 5.1V DC (Relay max. 4.0V + include diode max. 1.1V)	Min. 1.2V DC (Relay min. 0.8V + include diode min. 0.4V)	Approx. 10.0mA (Relay 7.0mA + LED 3mA)

4. Output rating (per relay)

Allowable load voltage	Allowable load current
600V (DC), 600V (AC peak value)	3A

*	The value above is the allowable value when no relay is installed. Please note that limitations apply to the load voltage and current depending on the type of relay installed.

5. Output rating when PA relay installed (per relay, at 20°C 68°F)

Specification	Item	Specifications
Contact rating	Rated control capacity (resistive load)	3 A 250 V AC, 3 A 30 V DC
	Maximum allowable contact power (resistive load)	750 VA (AC), 90 W (DC)
	Maximum allowable contact voltage	250 V AC, 30 V DC
	Maximum allowable contact current	3 A
	Minimum load (reference value)	100 mV 100 μA
Expected life	Electrical (resistive load)	Min. 3×10⁴: 3 A 250V AC, 3 A 30V DC Min. 10⁵: 2 A 250V AC, 2 A 30V DC
Expected life	Mechanical	Min. 2×10⁷ (at 180 times/min.)

*	During 4-point simultaneous operation, the rating per point is also as shown above.

6. Output rating when PhotoMOS Power Voltage-sensitive type installed (per relay, at 25°C 77°F)

Possible relays		Maximum load voltage (DC, AC peak value)	Continuous load current (DC, AC peak value)	Possible relays		Maximum load voltage (DC, AC peak value)	Continuous load current (DC, AC peak value)
Type	Part No.	Maximum load voltage (DC, AC peak value)	Continuous load current (DC, AC peak value)	Type	Part No.	Maximum load voltage (DC, AC peak value)	Continuous load current (DC, AC peak value)
DC only	AQZ102D	60V	1.80A	AC, DC dual use	AQZ202D	60V	1.350A
	AQZ105D	100V	1.15A		AQZ205D	100V	0.900A
	AQZ107D	200V	0.55A		AQZ207D	200V	0.450A
	AQZ104D	400V	0.30A		AQZ204D	400V	0.225A

*1	During 4-point simultaneous operation, the rating per point is also as shown above.
*2	Please use a load current that is within the range of the data given below in "Reference data Load current vs. ambient temperature characteristics".

Return to top

Specifications

RT-3 Unit relay/4-point Terminal

Item		Specifications	Condition
Breakdown voltage	Between input and output	2,000 Vrms	for 1 min.
Breakdown voltage	Between different terminals (between relays, both ways)	1,500 Vrms	for 1 min.
Insulation resistance		Min. 100 MΩ (Measurement at same location as “Breakdown voltage" section.)	Using 500 V DC megger
Vibration resistance (destructive)		10 to 55 Hz at double amplitude 1 mm .039 inch	In vertical, horizontal and longitudinal directions
Vibration resistance (functional)		10 to 55 Hz at double amplitude 1 mm .039 inch
Shock resistance (destructive)		Min. 196 m/s²	In vertical, horizontal and longitudinal directions
Shock resistance (functional)		Min. 98 m/s²	In vertical, horizontal and longitudinal directions
Ambient temperature		-20°C to +55°C - 4°F to +131°F	Not freezing and condensing
Ambient humidity		35% to 85% R.H.	Not condensing
Storage temperature		-30°C to +80°C -22°F to +176°F	Not freezing and condensing
Terminal screw fasten torque		0.3 to 0.5 Nm
Coil surge absorber		Diode (1 A, 400 V)
Cross connection protecting diode		1 A, inverse voltage 400 V
Unit weight		Approx. 100 g 3.53 oz

*1	The value of breakdown voltage and insulation resistance is the initial one.
*2	Condensing occurs when the unit relay is exposed to sudden temperature change in a high temperature and high humidity atmosphere. This may cause some troubles like insulation failure of the socket or the print circuit board. Take care under this condition.
*3	Below 0°C 32°F, condensing water can freeze and cause socket contact failures and other problems. Take care under this condition.

Reference data

1. Maximum value for switching capacity(output)
Per PA relay

2. Load current vs. ambient temperature characteristics (DC only)

3. Load current vs. ambient temperature characteristics (AC/DC dual use)

Return to top

1.Dimensions

External dimensions

General tolerance: ±0.3
General tolerance: ±.012

Internal schematic

*	Note: It is PA relay type. Cannot be equippend with PhotoMOS Power type. However, equipping with PhotoMOS Power Voltage-sensitive type is possible. The polarities of the output terminal socket are for the DC only type (equippend with AQZ10*D)

Mounting hole pattern

Return to top

Option

*Approved for all the optional products.

Unit : mm/inch

Short circuit plate

Use when you want to bridge terminals.

< With insulator >
AY3802

External dimensions
General tolerance: ±0.5
General tolerance: ±.020

< Without insulator >
AY3803

External dimensions
General tolerance: ±0.5
General tolerance: ±.020

Return to top

天码av无码一区二区三区四区,久久无码人妻精品一区二区三区 ,国产乱妇无码大黄aa片,玩弄japan白嫩少妇hd小说

4點單元繼電器/4點終端 (PA繼電器型)

產品簡介

詳細介紹

Features

1.Slim, space-saving type (33 mm 1.299 inch wide) with four independent points on a base measuring 33 × 67 mm 1.299 × 2.638 inch. This contributes to a more compact control panel.

2.PA relays, which have high sensitivity Au clad twin contacts, are installed.

3.Can be mounted on a DIN rail or mounted directly (by screw).

4.Equipped with an LED display to allow easy confirmation of operation.

5.Possible to select relay for use in the 4-point terminal in accordance with load.