機床商務網
詳細介紹
AN系列伺服減速機
輸出額定力矩
T2N : 40 Nm - 160 Nm
減速比
單節 : 5 / 10
雙節 : 25 / 50 / 100
低背隙
單節 : ≤1arcmin / ≤3arcmin / ≤5arcmin
雙節 : ≤5arcmin / ≤7arcmin
高效率
單節 : ≧ 97%
雙節 : ≧ 94%
AN系列伺服減速機
規格 | 節數 | 減速比1 | AN023 | AN023A | AN023B | AN023C | AN034 | AN034A | AN034B | AN034C | |
| 額定輸出力矩 T2N | Nm | 1 | 5 | 60 | - | 60 | - | 160 | - | 160 | - |
| 10 | 40 | - | 40 | - | 100 | - | 100 | - | |||
| 2 | 25 | 60 | 60 | 60 | 60 | 160 | 160 | 160 | 160 | ||
| 50 | 60 | 60 | 60 | 60 | 160 | 160 | 160 | 160 | |||
| 100 | 40 | 40 | 40 | 40 | 100 | 100 | 100 | 100 | |||
| 急停扭矩 T2NOT3 | Nm | 1,2 | 5~100 | 3倍額定輸出力矩 | |||||||
| 額定輸入轉速 N1N | rpm | 1,2 | 5~100 | 5,000 | 5,000 | 5,000 | 5,000 | 4,000 | 4,000 | 4,000 | 4,000 |
| 大輸入轉速 N1B | rpm | 1,2 | 5~100 | 10,000 | 10,000 | 10,000 | 10,000 | 8,000 | 8,000 | 8,000 | 8,000 |
| 超精密背隙 P0 | arcmin | 1 | 5~10 | - | - | - | - | ≤ 1 | - | ≤ 1 | - |
| 2 | 25~100 | - | - | - | - | - | - | - | - | ||
| 精密背隙 P1 | arcmin | 1 | 5~10 | ≤ 3 | - | ≤ 3 | - | ≤ 3 | - | ≤ 3 | - |
| 2 | 25~100 | ≤ 5 | ≤ 5 | ≤ 5 | ≤ 5 | ≤ 5 | ≤ 5 | ≤ 5 | ≤ 5 | ||
| 標準背隙 P2 | arcmin | 1 | 5~10 | ≤ 5 | - | ≤ 5 | - | ≤ 5 | - | ≤ 5 | - |
| 2 | 25~100 | ≤ 7 | ≤ 7 | ≤ 7 | ≤ 7 | ≤ 7 | ≤ 7 | ≤ 7 | ≤ 7 | ||
| 扭轉剛性 | Nm/ arcmin | 1,2 | 5~100 | 2.6 | 2.6 | 1.7 | 1.7 | 9.5 | 9.5 | 3.2 | 3.2 |
| 容許徑向力 F2rB2 | N | 1,2 | 5~100 | 950 | 950 | 1,000 | 1,000 | 2,450 | 2,450 | 2,550 | 2,550 |
| 容許軸向力 F2aB2 | N | 1,2 | 5~100 | 475 | 475 | 500 | 500 | 1,225 | 1,225 | 1,275 | 1,275 |
| 使用壽命 | hr | 1,2 | 5~100 | 20,000 * | |||||||
| 效率 | % | 1 | 5~10 | ≧ 97 % | |||||||
| 2 | 25~100 | ≧ 94 % | |||||||||
機床商務網