SY-H 中實回轉油壓缸? 油缸體采用優質鋁合金制造，重量輕、體積小、經久耐用。? 高轉速狀態性能穩定。? 安裝時可直接由后端擰緊固定。? The cylinder body is made of high quality aluminum alloy, lightweight, small and durable.? High speed performance stabiling.? Can screw it from the rear and of the cyindor when mounting. -->

產品參數

尺寸圖 Size Fig

 

尺寸參數 Dimensions(mm)

規格 Spec	A	B	D1	D2	E(H7)	F1	F2(H8)	G		H	M1	M2	M3
型號 Model								max	min
SY-75H	75	107	90	90	65	28	21	45	30	60	M20x35	M8x65	6-M8x16
SY-100H	100	132	115	100	80	28	21	45	25	77	M20x35	M8x80	6-M10x20
SY-125H	125	160	140	130	110	35	25	50		85	M24x40	M8x90	6-M12x20
SY-150H	150	190	170			45	31	55		98	M30x45	M10x100	12-M12x24
SY-200H	200	245	220	145	120	55	37	70	35	118	M36x60	M10x125	12-M16x30
SY-250H	250	296	275	200	160	60	37	100	40	156	M36x60	M12x160	12-M20x30

 

性能參數 Specifications

規格 Spec	活塞面積 Eff piston area(cm2)		活塞行程 Piston stroke(mm)	極限轉速 Max. Speed (r/min)	大使用壓力 Max. pressure MPa(kgf/cm2)	大推拉力 Max.pull force kgf(KN)		慣量 Moment of inertial (kg.m2)	重量 Weight(kg)
型號 Model	推側 Extend	拉側 Retract				推側 Extend	拉側 Retract
SY-75H	41.7	37	15	6000	40(4.0)	1500(14.7)	1330(13)	0.02	3.2
SY-100H	75.4	70.8	20	5000		2710(26.6)	2550(25)	0.04	4.8
SY-125H	119.6	111.5	25			4300(42.1)	4010(39.3)	0.06	7.2
SY-150H	173.6	159.2	30			6250(61.2)	5730(56.1)	0.10	9.8
SY-200H	314.1	290.4	35	4000		11300(110.8)	10454(102.4)	0.25	15.7
SY-250H	485.7	462.3	60	2000		17500(171.5)	16640(163.0)	0.52	45.5

注: 回油管應單獨接回油槽內，且回油口要高于油面，以免產生背壓。
The drain port should be independently connected to oil tank to avoid back pressure.