機床商務網
詳細介紹
平面成型磨床廠家技術參數
| 規格Specifications | JF-4510/5010AHR/AHD | ||||||
| 能力 General Capacity | 工作臺面積Worjing of table | mm | 1000*450/500 | ||||
| 大研磨面積 Max.surface ground | mm | 1100*500/510 | |||||
| 工作臺左右大行程 Max.table travel | mm | 1150 | |||||
| 工作臺前后大行程Max.saddle travel | mm | 480 | |||||
| 工作臺面至主軸中心大距離（大約值） Max.distance center of spindle to table | mm | 600 | |||||
| 工作臺Longitudinal Movement | 工作臺速度（大約值）Table speed | mm/min | 5-25（probably) | ||||
| 前后 Cross Movement | 前后手輪進刀 Cross feed on hand wheel | 1轉/1 rev. | mm | 4（0.16"） | |||
| 1格/1 gra. | mm | 0.02（0.001"） | |||||
| 前后快速移動速率Rapid power cross feed approx | mm/min | 940(50Hz)（probably) | |||||
| 上下 Vertical Movement | 上下手輪進刀Verticalfeed on hand wheel | 1轉/1 rev. | mm | 1（0.05"） | |||
| 1格/1 gra. | mm | 0.005（0.0002"） | |||||
| 上下自動進給量Auto.Down feed | mm | 無（None) | 0.001-0.999/time | ||||
| 上下快速移動速率Rapid power Vertical feed approx | mm/min | 無（None) | 250(50Hz)/300(60Hz)(probably) | ||||
| 砂輪GDINDING Wheel | 砂輪尺寸Grinding wheel dimension | mm | Max400*40*127(13.7"*1.6"*3") | ||||
| 砂輪轉速Wheel speed | rpm | 1400(50Hz)/1700(60Hz)(probably) | |||||
| 馬達 Motors | 主軸馬達Spindle motor | hp | 7.5 | ||||
| 前后進給馬達Auto.cross feed motor | w | 60 | |||||
| 上下進給馬達Rapid head elevation motor | hp | 80 | 步進馬達Stepping | ||||
| 油壓泵馬達Hydraulic system | hp | 3 | |||||
| 潤滑泵Lubricaton system | w | 25 | |||||
| 冷卻泵Coolant pump | hp | 1/4 | |||||
| 噪音值Sound pressure level | db(A) | 低于78(Below78) | |||||
| 尺寸 Size | 機器作業空間Maching floor space | mm | 2200*3050(87"*120")(probably) | ||||
| 機器凈重Maching net weight | kgs | 3150(3080lbs)(probably) | |||||
| 裝箱毛重Packing gross weight | kgs | 4600(3410lbs)(probably) | |||||
| 裝箱尺寸（長x寬x高）Packing dimension | mm | 3020*2160*2347(121"*85"*93")(probably) | |||||
平面成型磨床廠家
機床商務網