詳細介紹
使用本滾刀可以使齒輪齒形和齒頂倒角同時切出。
訂貨時請提供下列參數:
1)模數或徑節m or D.P.
2)壓力角P.A.
3)被加工齒輪齒數Z,通常采用Z=35
4)齒輪倒角量,通常采用圓周方向C=0.08m;半徑方向f=0.1m特殊要求可另行設計。
This kind of hobs can cut out gear tooth profile and tip relief simultaneously.When ordering, please offer date as follows:
1) Module or diametral pitch m or D.P.
2) Pressure angle P.A.
3) Teeth of gear manufactured Z, in usual condition Z=35.
4) Chamfer amount of gear, Usually C=0.08m along circle. f=0.10m along radius.Special request can be taken to design.