應用范圍：

D6數控六面鉆適用于板式家具的掃描、打孔、銑型、開槽等加工。雙夾鉗設計，一次裝夾，即可全自動加工六面孔、雙面槽，精度好，效率高。

主要配套電子鋸或開料機使用，前端只需開料或配套開槽，后端打孔輔助開槽，正常情況下一臺高速開料機配套一臺六面鉆，日均產量在300平方以上。

后置后出料系統，配套回轉線傳送帶與工業機器人，可實現與其他設備對接配套，達到自動化、智能化生產加工，可實現定制化板式家具的高效生產。

Application

D6 CNC automatic six-sided drilling machine is suitable for scanning, drilling, milling and slotting of panel furniture. With double clamp design and once clamping, the machine can automatically process six-sided drilling and double-sided grooving with good accuracy and high efficiency.

Working with electronic panel saw or CNC cutting router, the front-end machine only need to cut material or matching slotting, the rear-end machine only need to drill holes and auxiliary milling slots. Under normal conditions a high-speed CNC router matching with a six-sided drilling machine, the average daily output could be over 300 square meters.

The rear material unloading system, with the conveyor belt and the industrial robot can be matched with other equipment to achieve automatic and intelligent production and realize efficient production of customized plate furnitur.

核心優勢：

控制系統：采用19寸彩屏顯示，友好的的UI界面，可無縫對接板式家具設計軟件輸出的數據，亦可獨立創建孔槽信息，單獨輸出生產，使加工過程簡單靈活。

傳動系統：采用導軌、齒條、減速機，使傳動更精確。

潤滑系統：采用微電腦控制自動潤滑系統，定點定量潤滑，使設備運行平順，減少維護。

電氣配件：采用法國施耐德電氣配件，定制款高柔屏蔽電纜、高速*拖鏈；

驅動系統：采用大扭矩高速值伺服電機，不回原點，開機即可工作；

輸送系統: 氣浮臺面，防劃傷板件；后置自動下料皮帶機，具備前進前出，前進后出功能；

吸塵系統：分控獨立吸塵裝置、浮動式吸塵結構設計，使吸塵效果更佳。

機械架構：機架均采用時效退火、五面體CNC一次加工而成，結構穩定，精度保證！

Advantages:

Control system: 19-inch color screen display, friendly UI interface, can seamlessly dock plate furniture design software output data, can also independently create holes/slots information, separate output production, so that the processing process is simple and flexible.

Transmission system: using internationally famous brand linear guideway, rack and reducer to achieve more accurate transmission.

Lubrication system: with microcomputer controlled automatic lubrication system, fixed point quantitative lubrication, make equipment running smoothly and reduce maintenance.

Electrical accessories: French Schneider electrical accessories, custom high flexible shielded cable, high-speed silent drag chain;

Drive system: adopt large torque high speed absolute-value servomotor, do not need to return to the original point, the drilling machine can immediately launch at startup.

Conveying system: air floatation table, scratch proof plate, rear automatic blanking belt conveyor, with forward input and forward output, forward input and backward output function.

Dust collection system: separate control independent vacuum device and floating dust suction structure design, so that the dust suction effect is better.

Mechanical structure: machine base is made by aging annealing and five-sided CNC processing. The structure is stable and the accuracy is guaranteed.

技術參數：Technical parameters

Technical parameters