機床商務網
詳細介紹
加長車床，重型車床，多刀位車床，軋輥車床，國標車床
加長車床，重型車床，多刀位車床，軋輥車床，國標車床
，多刀位車床，軋輥車床，國標車床
| CW61150×5000mm（1100mm）Horizontal Lathe | ||
| 床身上zui大回轉直徑swing over bed | mm | 1600 |
| 刀架上zui大回轉直徑 swing over carriage | mm | 1100 |
| zui大工件長度 Max. length of work piece | mm | 6000 |
| zui大工件重量 Max. weight of work piece | T | 10 |
| 床身導軌寬度 Guide way width | mm | 1100mm |
| 主軸 Spindle | ||
| 主軸孔徑 Spindle bore | mm | 130 |
| 主軸錐孔 Taper hole of spindle | Metric 140 | |
| 主軸轉速范圍 Spindle speed | . r/min | 3.15-315 (Foreward ) 3.5-178 (Reversal) |
| 主軸轉速級數 Number of spindle speed | .k kinds | 21 (Foreward ) 12 (Reversal) |
| 進給 Feed motion | ||
| 縱橫向進給量種數范圍 Number of feeds per revolution (longitudinal/ transverse) | mm | 56 kinds;0.1-12/ 56kinds;0.05-6 |
| 公制螺紋種數范圍 Number and range of metric thread | mm | 44;1-120 |
| 英制螺紋種數范圍 Number and range of inch thread | . | 31;24-1/4T.P.I |
| 模數螺紋種數范圍 Number and range of module thread | mm | 45;0.5-60 |
| 徑節螺紋種數范圍 Number and range of diametrical pitch thread | . | 38; 1/2-56Dp |
| 中刀架 Tool post | mm/min | 935 |
| 下刀架zui大橫向行程 Max. travel of lower slide | mm | 630 |
| 上刀架zui大行程 Max. travel of top slide | mm | 300 |
| 刀架快速移動速度 縱向 Tool rest fast moving speed Longitudinal | mm/min | 3740 |
| 刀架快速移動速度 橫向 Tool rest fast moving speed Horizontal | mm/min | 1870 |
| 尾座 Tailstock | ||
| 尾座套筒直徑 Diameter of Tailstock quill | mm | 160 |
| 尾座套筒行程 Travel of tailstock quill | mm | 300 |
| 尾座套筒錐孔錐度 Taper hole of tailstock quill | Metric | 莫氏圓錐8號 |
| 主電動機功率 Main motor power | kw | 22 |
| 車床尺寸（長X寬X高） | mm | 9500x2410x2770 |
| 車床重 Machine weight | T | About 13 |
| 驗收標準 Acceptance standard | ||
| GB/T420 | ||
機床商務網