機床商務網
詳細介紹
Mould Temperature Controller Mould Temperature Controller
Detailed Product Description
PID adopted to control the temperature, keeping long time constant temperature, high efficiency and energy saving
1. PID adopted ,accurate temperature control, keeping the error within -0.5---+0.5 degree
2. Dual digital display shows the actual temperature and the set temperature.
3.six protective measures; alarm for thermocouple open circuit, phase fault protect, pump protect, overheat protect, ail shortage protect.
4. Microcomputer chip control panel, visual and easy to operate, easy to maintain
5. Water type mould temp. controller
6. Circumfluence type is able to re-collect the diathermanous oil easily and rapidly.
7. For 6kw---120kw, two in one mould temp. controller is available.
模溫機循環示意圖：
W系列高溫水式模溫機技術參數表
| 機型/單位 Model / Units | W-6H | W-9H | W-12H | W-9H2 | W-12H3 |
| 溫控范圍 (℃) Temperature range | 30-140℃ | 30-180℃ | |||
| 溫控精度(℃) Accuracty of temp.control | ±1℃ | ||||
| 電源 (V)Power supply | AC220V/3φ380V50HZ/60HZ | ||||
| 傳 熱 媒 體 Medium | 水Water | ||||
| 冷卻方式 Cooling method | 間接冷卻(板式熱交換器) INDIRECT COOLING | ||||
| 加熱能量(KW)Heating capacity | 6 | 9 | 12 | 9 | 12 |
| 泵浦馬力(KW/HP)Pump horsepower | 0.37/0.5 | 0.75/1 | 0.75/1 | 1.5 /2 | 1.5 /2 |
| 補水泵功率(KW) Fill water pump power | 0.18 | ||||
| zui大泵流量/ 壓力(L/MIN/ KG/CM2)Pump max.flow pressure(50HZ/60HZ) | 35L/min 2.6kg/c㎡ | 145L/min 2.6kg/c㎡ | 145L/min 2.6kg/c㎡ | 165L/min 3.0kg/c㎡ | 200L/min 3.5kg/c㎡ |
| 45L/min 2.6kg/c㎡ | 180L/min 2.6kg/c㎡ | 180L/min 2.6kg/c㎡ | 205L/min 3.0kg/c㎡ | 255L/min 3.5kg/c㎡ | |
| 冷卻入水壓力(KG/CM2)Cooling into the water pressure | 2.6 | 3.0 | 3.5 | ||
| zui大電力消耗 (KW)Maximumpowerconsumption | 6.55 | 9.93 | 12.93 | 10.68 | 13.68 |
| 冷卻水配管(INCH)Cooling water pipe | 1/2’’PT | ||||
| 循環水配管 (INCH)Circulating water piping | 2進2出至1/4’PT | 4進4出至3/8’’PT或1進1出至1’’PT | |||
| 外型尺寸(CM)Dimensions L*W*H | 75*30*75 | ||||
| 凈重(KG)Weight | 70 | 75 | 80 | 85 | 90 |
機床商務網