機床特點：

★本機床主要是面向國內外機電晶體行業，水晶石矩形片磨削成圓形片，并可在返程后

二次進給磨出所需之圓缺（平臺）而開發的新型機床。

★該機床可以手動操作，也可自動磨削，生產效率高

★ 本機床采用液電聯合控制，工作方式分單獨磨圓及磨圓后一次磨扁兩種

技術規格：TECHNICAL SPECIFICATIONS

中心高Height of center                                                            100mm

磨削直徑Diameter to be ground                                                   φ5-φ20mm

磨削長度Max. length to be ground                                               100 mm                                                       

 磨扁進刀深度Grinding depth                                                        1 mm

工作臺回轉角度Table rotation angle                                                   ± 9°

頭架的回轉角度Rotation angle of headstock                    順時針：10°  逆時針：90°

砂輪架回轉角度Rotation angle of grinding wheel rack                                   ± 180°

砂輪尺寸Dimensionof Max. grinding wheel                              φ300×26×φ127mm

砂輪線速度Linear speed of grinding wheel                                            ≤35m/s                                                 

砂輪架電機功率Motor power of grinding wheel rack                                     2.2kw

機床外形尺寸Outline dimension of machine tool                     

1500×1200×1450mm

 凈重  Net weight                                                                  1300 Kg

 毛重  Gross weight                                                               1400 Kg

工作精度：WORKING ACCURACY（磨削國家標準試磨件）

圓度 ：           0.03 mm

           直徑一致性：      0.03 mm  

表面粗糙度       Ra：1.6μm

平面布置圖

1. 主機高度1300mm

2. 機床應安裝在遠離震源的堅固基礎上，用機床底下的3塊墊鐵來調整安裝水平。用水平儀檢查機床的水平性。縱向≤0.04/1000，橫向≤0.04/1000，當機床調整完畢后，可加入必要的輔助墊鐵，注入混凝土固定