通孔回轉油缸
■尺寸參數 Dimension Parameters
■性能參數 Characteristic Parameters
| 規格 Size | D | D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | z-d | L1 | L2 | h | H | B | G | |
| max | min | ||||||||||||||||
| 100×26 | 100 | 70 | 115 | 26 | M33×1.5 | 40 | 130 | M33×1.5 | 60 | 6-M8 | 200 | 135 | 5 | 110 | 30 | 27 | 7 |
| 125×35 | 125 | 100 | 125 | 35 | M42×1.5 | 50 | 155 | M39×1.5 | 60 | 12-M10 | 205 | 135 | 5 | 125 | 25 | 29.5 | 4.5 |
| 160×52 | 160 | 125 | 160 | 52 | M60×2 | 70 | 190 | M60×2 | 86 | 12-M10 | 247 | 162 | 5 | 150 | 30 | 33 | 3 |
| 200×65 | 200 | 160 | 200 | 65 | M75×2 | 82 | 234 | M68×2 | 96 | 12-M12 | 260 | 170 | 6 | 170 | 30 | 34 | 4 |
■性能參數 Characteristic Parameters
| 規格 Size | 活塞有效面積㎝2 Piston effective area | 活塞行程Lmax Piston stroke | zui大使用壓力Mpa Max. acting pressure | 極限轉速r/min Max. speed | zui大推拉力kN Max. draw pull | 凈重Kg Net WT |
| 100×26 | 66 | 20 | 3.5 | 5000 | 20 | 13 |
| 125×35 | 103 | 25 | 3.5 | 4000 | 32 | 14 |
| 160×52 | 162 | 30 | 3.5 | 3500 | 51 | 24 |
| 200×65 | 261 | 30 | 3.5 | 3000 | 82 | 28 |
產品備注
※1、活塞桿前端螺紋可直接旋入拉管，后端螺紋可附設行程開關觸頭裝置。
2、進出油管采用卡套式端直通管接頭，高壓軟管對接螺母與管接頭連接紋為M18×1.5，管子外徑為Φ12mm，泄油管應選用內徑為Φ22mm的透明塑料管。
※1、The piston rod, with the thread on the front end, can be screwed into the draw tube directly. An auxiliary device of stroke-mounting limit switch can also be fixed in the thread on the rear end of piston rod.
2、The in-and-out oil hose refers to straight thread connector. The high pressure soft hose nut and the connecting thread of the connector is M18×1.5. The outer diameter of the high press soft hose is Φ12mm. The leak oil hose should be Φ22mm transparent plastic hose.
