本機床是發動機制造業，洗衣機制造業，各種套類，軸承類的典型加工設備。具有很強的通用性，它是在液壓機床上增加壓力傳感器，經過微機組成的數據采集及系統處理，轉換成壓裝力植，進行數字顯示，超*，送出聲光報警及停機信號，以達到對壓裝力實現自動控制的目的，載荷顯示控制器，顯示清晰，控制準確，反應快，工作穩定可靠，更換不同的傳感器及應用軟件，用于噸位不同的鍛壓設備，計數器的應用使每位操作者都知道總數與不合格數，增加了雙手按鈕使機器的操作更加安全。

This machine tool is a kind of processing equipment used in the fields of motor-washing machine and various of sleeves and bearing with strong suitability, with a pressure sensor on the hydraulic, through the data collection and systematic treatment done by a micro computers. Turning into arberforce value and makes digital display. When the limited time is reached,it will give an acoustoopticalalarm and a signal for stopping the machine tool, so that to reach the aim for controlling the machine tool automatically, The load-display-controlled displays clearly, with accurate control, instant response, reliable operation and can be replaced with different sensors and application software used for forging equipments with different tonnages. The application of counter let every operation know the sum total and the number for unqualified, with double pressed bottoms increased ,the operation of the machine tool becomes safer.

型號Type		單位Unit	1T	2.5T	6.3T	10T	16T	25T	40T	63T	100T
公稱力Nominal force		KN	10	25	63	100	160	250	400	630	1000
液體zui大工作壓力The maximum working pressure of the fluid		Mpa	4.2	5	5.1	8.1	13	20.3	23	24.7	26.3
滑塊下平面距工作臺面zui大距離The maximum distanc between the under surface of the slipper and the surface of the working platform		mm	300	300	450	500	600	600	700	800	800
滑塊zui大行程The maximum stroke of the slipper		mm	120	160	250	300	350	350	400	500	500
滑塊速度The velovity of the slipper	滑塊下行速度Down velocity of the slipper	mm/s	47	48	48	48	48	33	37	24	23
	滑塊工作速度The working velocity of the slipper	mm/s	7-15可調
	滑塊回程速度Retrn velo city of the slipper	mm/s	120	120	120	120	120	120	120	120	120
喉深The depth		mm	100	200	250	250	280	280	320	350	350
工作臺尺寸The size of the Working platform	前后Front,Rear	mm	320	320	480	480	500	500	550	600	600
	左右Left,Right	mm	480	480	550	550	650	650	700	800	800
工作臺距地面高度The heigth of the working platform to the suface of the floor		mm	700	700	710	710	710	710	710	710	710
落料孔徑The diameter for cuting hole		mm	30	70	80	80	100	100	100	120	120
電機功率The power for motors		kw	1.1	2.2	2.2	3	5.5	5.5	5.5	5.5	5.5
機床外形尺寸The conriguration size of the machine tool	前后Front,Rear	mm	530	900	900	1100	1100	1100	1350	1530	1630
	左右Letf,Right	mm	500	730	730	960	960	960	1000	1600	1600
	地上高度The height above the floor	mm	1470	1800	1910	2200	2300	2300	2700	2900	2600
總重量(約)Total weight(approx)		kg	250	700	1000	1300	1500	2300	3500	3500	4500