Transmission rate

Transfer rate

• ● at the 1st interface acc. to PROFIBUS

9.6 kbit/s ... 12 Mbit/s

Interfaces

Number of electrical connections

• ● at the 1st interface acc. to PROFIBUS

1

Type of electrical connection

• ● at the 1st interface acc. to PROFIBUS

9-pin Sub-D socket (RS 485)

Supply voltage, current consumption, power loss

Type of voltage of the supply voltage

DC

Supply voltage

• ● 1 from backplane bus

3.3 V

Relative symmetrical tolerance for DC

• ● at 3.3 V

5 %

Consumed current

• ● 1 from backplane bus for DC maximum

0.52 A

Active power loss

1.8 W

Permitted ambient conditions

Ambient temperature

• ● during operation

5 ... 45 °C

• ● during storage

-20 ... +60 °C

• ● during transport

-20 ... +60 °C

Relative humidity at 25 °C without condensation during operation maximum

95 %

Protection class IP

IP00

Design, dimensions and weight

Module format

PC card Type II CardBus (32 bit)

Width

86 mm

Height

5 mm

Depth

54 mm

Net weight

130 g

Number of plug-in cards of same design plug-in per PC station

1

Number of units Note

-

Performance data

Performance data open communication

Software for open communication by means of SEND/RECEIVE required

Yes, SOFTNET-PB DP / SOFTNET-PB DP Slave / SOFTNET-PB S7

Number of possible connections for open communication by means of SEND/RECEIVE maximum

50

Performance data PROFIBUS DP

Software for DP master function required

Yes, SOFTNET-PB DP

Service as DP master

• ● DPV0

Yes

• ● DPV1

No

• ● DPV2

No

Number of DP slaves on DP master usable

64

Amount of data

• ● of the address area of the inputs as DP master total

7 808 byte

• ● of the address area of the outputs as DP master total

7 808 byte

• ● of the address area of the inputs per DP slave

244 byte

• ● of the address area of the outputs per DP slave

244 byte

• ● of the address area of the diagnostic data per DP slave

244 byte

Software for DP slave function required

Yes, SOFTNET-PB DP slave

Service as DP slave

• ● DPV0

Yes

• ● DPV1

No

Amount of data

• ● of the address area of the inputs as DP slave total

122 byte

• ● of the address area of the outputs as DP slave total

122 byte

Performance data S7 communication

Software for S7 communication required

Yes, SOFTNET-PB S7

Number of possible connections for S7/PG communication maximum

8

Performance data multi-protocol mode

Number of configurable connections per PC station

207

Product functions management, configuration

Configuration software required

Included in the scope of delivery of the required software product

Product functions Diagnosis

Product function

• ● Port diagnostics

Yes

Standards, specifications, approvals

Standard

• ● for EMC

2004/108/EC

• ● for safety from CSA and UL

CAN/CSA C22.2 & UL 60950-1

• ● for emitted interference

EN 61000-6-3, EN 61000-6-4

• ● for interference immunity

EN 61000-6-1, EN 61000-6-2

Certificate of suitability

• ● CE marking

Yes

• ● C-Tick

Yes