1.MC均為定寸研磨方式；任何相同規格之方型盤W,X,Y,Z各點之高度公差為0.05mm以內。
2.MC規格均可替換生爪，作不規則形狀之加工，以替代中心機大量治具，更經濟、方便。
3.硬爪重復夾持之精度公差為0.02mm以內。
4.側邊平行校正后，硬爪夾持之平行公差為0.05mm以內。
MC SQUARE SHUCKS
1.MC chucks are precisely ground,the tolerances of W,X,Y,Z among chucks are with in 0.05mm.
2.Soft jaws can be used alternatively for machining special shaped work pieces,to substitute for designing and making a lot of jings for this purpose.
3.The repetitive gripping accuracy with the hard jaws are with in 0.02mm.
4.Parallel gripping accuracy with hard jaws can be controlled with in 0.05mm after aligning sides of chucks.
規格 / Specification 單位/UNIT：mm
| 型式/規格 MODEL/SPEC | 外徑夾持范圍 O.D.Clamping Range mm | 內徑夾持范圍 I.D.Clamping Range mm | 凈重 Weight kg |
|---|---|---|---|
| MC-06 | ?4-?128 | ?55-?128 | 11.4 |
| MC-08 | ?5-?162 | ?65-?162 | 18.6 |
| MC-10 | ?6-?200 | ?72-?200 | 31.6 |
| MC-12 | ?10-?265 | ?90-?265 | 56.6 |
| 型式/規格 MODEL/SPEC | A | B | C | D | E | F | G | H | J | K | L | M | N | P | Q | R | S |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MC-06 | 215 | 57 | 18 | 130 | 40 | 5.5 | 4-M10x1.5P | 68 | 26 | 39 | 14 | 144 | 165 | 144 | 165 | 66 | 18 |
| MC-08 | 250 | 65 | 20 | 160 | 55 | 6 | 4-M12x1.75P | 82 | 28 | 43 | 17 | 174 | 200 | 174 | 200 | 83 | 18 |
| MC-10 | 310 | 72 | 22 | 200 | 70 | 6 | 4-M14x2P | 93 | 32 | 50 | 21 | 218 | 250 | 218 | 250 | 104 | 18 |
| MC-12 | 380 | 82 | 25 | 260 | 100 | 7 | 4-M16x2P | 118 | 40 | 56 | 23 | 274 | 310 | 274 | 310 | 135 | 22 |
保留技術更改的權利,恕不另行通知 Subject to technology changes without prior information
非標需求可定做 Non-standard requirements can be made
