大通孔設計，雙活塞設計，拉力能加大1倍。通孔貫穿可加工長軸類零件。
輕量型，高轉速，閥體經特殊設計，能使壓縮空氣的消耗量節減，充分發揮高效經濟效益。
內部零部件皆采用進口原件，運轉平衡，高壽命。
特大通孔可根據客戶需求定制。
使用時請注入微量油霧。
Large through hole for long workpiece working,ａnd double piston design,the pull force doubled.
Light weight and high rotating speed,special designed valve which economize air consumption,the cost is saved.
The components of cylinder is imported and high quality,equilibrium running and long service life.
For special large through hole can be customized according to your requirements.
During using,a little oil mist should be contained.
尺寸單位/Size unit: mm
| 規格 Spec 型號 Model | 活塞面積 Piston area cm2 押側Extend | 活塞面積 Piston area cm2 拉側Retract | 活塞行程 Piston stroke mm | 轉速 Max RPM |
|---|---|---|---|---|
| RQ-130B | 223.03 | 219.3 | 15 | 5000 |
| RQ-150B | 291.19 | 281.76 | 15 | 4500 |
| RQ-170B | 381.52 | 371.3 | 15 | 4500 |
| 規格 Spec 型號 Model | 使用壓力 Max.Operating Pressure Mpa(kgf/cm2) | 推力 Max push force Kgf(KN) | 拉力 Max pull force Kgf(KN) | 慣性矩 I kg*m2 | 重量 Weight kg |
|---|---|---|---|---|---|
| RQ-130B | 0.8(8) | 1784.24(17.5) | 1754.4(17.2) | 0.04 | 12 |
| RQ-150B | 0.8(8) | 2329(22.83) | 2254.1(22.09) | 0.06 | 10.3 |
| RQ-170B | 0.8(8) | 3052.1(29.91) | 2970.4(29.11) | 0.09 | 12.5 |
| 規格 Spec 型號 Model | A | B | D | E H7 | F1 | G1 Max. | G1 Min. | G2 Max. | G2 Min. | H | L |
|---|---|---|---|---|---|---|---|---|---|---|---|
| RQ-130B | 130 | 160 | 143 | 110 | 50 | 15 | 0 | 38 | 23 | 105 | 25 |
| RQ-150B | 150 | 180 | 163 | 110 | 65 | 15 | 0 | 35 | 20 | 105 | 25 |
| RQ-170B | 170 | 200 | 182 | 110 | 65 | 15 | 0 | 34 | 19 | 107 | 25 |
| 規格 Spec 型號 Model | M1 | M2 | M3 | O H7 | N | R | T | U | X |
|---|---|---|---|---|---|---|---|---|---|
| RQ-130B | M38×1.5 | M44×1.5 | 6-M8×115 | 34 | M5×10 | 42 | 74 | 104 | 90 |
| RQ-150B | M55×2 | M52×1.5 | 6-M8×115 | 46 | M6×10 | 50 | 86 | 123 | 110 |
| RQ-170B | M55×2 | M52×1.5 | 6-M8×120 | 46 | M6×10 | 50 | 86 | 123 | 110 |
