Features
- 1. It can process a variety of metal and non-metal materials，especially for marking high hardness, high melting point and brittle materials.
- 2. It belongs to non-contact processing with good marking quality, no damage to the product, no tool wear.
- 3. For the laser beam is very thin, the processing heat affected zone is small and the processing material is consumed very small either.
- 4. Adopting computer control, it is easy to achieve automation and has high processing efficiency.
- 5. Working hours can reach 100,000 hours and the processing speed is 2-3 times that of the traditional laser marking machine.
Advantages
Servo Motors
Non-Contact Marking
Smaller volume
Scanning galvanometer
Wide range of marking
Imported laser
Technical Parameters
| Laser Power | 30W/50W |
| Laser Length | 1060mm |
| Standard Marking Area | 110×110mm |
| Optical Marking Area | 50*50mm,100*100mm,50*150mm |
| Engraving Depth | ≤1.2mm |
| Engraving Speed | ≤12000mm/s |
| Minimum Line Width | 0.01mm |
| Minimum Character | 0.05mm |
| Resolution Ratio | ±0.001mm |
| Gross Power | ≤500W |
| Working Voltage | 200V/50Hz/10A |
Application
Widely used in marking of graphics and text of integrated circuit chips, computer accessories, industrial bearings, watches, electronic and communications products, aerospace equipment, various automotive parts, home appliances, hardware tools, molds, wire and cable, food packaging, jewelry, tobacco and military matters, etc.
