| X. Y. Z 軸 | ||
| X, Y, Z 行程l | 4000 x 3000 x 1500 | mm |
Key Points
• Very large working area: 4000 x 3000 x 1500 mm, thanks to gantry concept.
• Workpiece weight limit, limited to floor resistance, suitable for the heaviest tools.
• Fully digitized and repeatable process replacing actual manual texturing process
• Better accuracy and definition of the mould texturing
• Unlimited design possibilities
Specifications
激光源
Ytterbium pulsed fibre laser 50 W standard W
線性軸
X-Travel : Usable / (mechanically installed) 4000 mm
Y-Travel : Usable / (mechanically installed) 3000 mm
Z-Travel : Usable / (mechanically installed) 1500 mm
Rapid feedrate on X- /Y-/Z- axis in m/min; acceleration m/s2 30/30/20 ; (2/2/2) -
Tilting Head
B Axis : Speed : Angle 180°/s; 370° 180°/s; 370°
A Axis : Speed : Angle 180°/s; 270° 180°/s; 270°
Long focal optics / Focal distance ~ 254 Standard Standard
激光機專用設備
Operator panel for laser machines with 19" monitor, 2 free USB connections, Keyboard and Mouse 1 internal + 1 external -
Manual remote control 1, standard
Vision camera for positioning Standard Standard
Camera for monitoring Standard 1, Standard
Air Dryer Unit Standard 1000 lt/min, 5-7 bar 400 lt/min, 5-7 bar
Air pressure gun set Standard -
Cabin exhaust unit Standard Standard
Preparation for Laser Cooling system Standard Standard
Working area -
在桌子上重量 18000 kg kg
Height of working table over floor 150 mm
Max. work piece dimensions 5-axis operation (mm); with long Focal 330 2500 x 1500 x 900 2500 x 1500 x 300
Working table composed of ajustable plates with thread Gird 100mm x 100mm, covering working area, we Option Option
一般
Operating Voltage (Frequency: 50/60 Hz for all models) 3 x 400VAC (3xL + E) -
Compressed air requirement (w/o oil) 6-8 bar -
Machine dimensions (width x depth x height, mm) without a control panel, height from ground to top 8500 x 8900 x 5250 mm
Approx.Machine weight Install./Trsp weight (x 1'000 kg) ~12 kg
Recommended ambient conditions to reach the optimum precision
Temperature variation: 20°C/,5°C per hour/± 1,5°C per day 20°C / 0.5 C° per hour
Without air current or heat/cold source : e.g. sun light -
No vibration influence -
Special floor is required, data not yet defined customer customer
X. Y. Z 軸
X, Y, Z 行程l 4000 x 3000 x 1500 mm
Pictures
產品規格
其他
