1、特殊的夾具可研磨0.8~26mm的鉆頭，只需要用一個夾具便可夾持所有尺寸，一次完成，不需要因為欲研鉆頭大小而購買一大堆大大小小的彈性夾頭來更換，也不必尋找量尺來測量所研磨的鉆頭大小，更不必花很多時間去尋找適合尺寸的筒夾來夾持鉆頭，并保證鉆頭左右齒角的對稱性，鉆頭唇角度可依需求任意調整。

2、可研磨鉆頭的靜點，并可研磨一般鉆頭研磨機無法研磨的木工鉆頭及階梯鉆、端銑刀端部，皆于同一家具便可完成。

3、機構動作簡單，使用方便，無研磨經驗的小孩及眼里較差的老人家都能利用本機研磨出師傅級的鉆頭。

Product featuese:

Usinga special drill chuck holder,it can grind the drills rang from 0.8 to 26mm,onechuck can hold different-sized drills.You do not need to buy a range of chucks togrind different-sized drills,You do not need measuring rules to measure thesizes of the drills that you want to grind.It can also save you times.So you donot need to look for the perfect-sized chuck to hold the drills.It guaranteesthe symmetry of the drill’s two sides.The angles of the drill can be adjustedaccordingly.

Itcan grind the central point of the drill.It can also grind the wood workingdrill bit and setp drill bit,end mill front,which average drill grinders cannot accomplish.You can complete different tasks using the same chuck.

It’seasy to use.children with no grinding experience and the elderly with pooreyesight can use this machine to produce excellent drill bit.

技術參數 Technicalparameter: