LSK5705高速數控上拉式硬拉床是我公司自主研發具有知識產權的新產品 , 對主要部件通過三維建模、 三維分析采用*的工藝手段制造出的位于前列臺高速數控上拉式硬拉床。 此型號拉床加工效率*,工件單件加工成本大幅降低,可帶自動上下料機械手連線生產。
該拉床主要針對熱后工件的內孔、內花鍵及各種不同形狀內齒進行整形加工;工件被拉削部位的較高硬度可達HRC60以上,是提高工件的內孔、內花鍵、內齒輪等表面粗糙度和齒形精度的關鍵設備。硬質合金*刃磨一次可拉削工件近萬個,共可刃磨15次左右,該拉床的成功研制,為我國的拉床制造業*了一項空白。LSK5705 high-speed CNC upward hard broaching machine is special product independent research and development by our company. the main components are 3D modeling and3D analysis, the first high-speed CNC upward hard broaching machine in China manufactured by advanced technology and method. This broaching machine is high processing efficiency. the processing cost of work piece is economy, The machine can apolegamy Automatic material delivery machine then。
This broaching machine used for broaching quenched inner bore. internal spline and various kinds internal tooth the highest hardness reach HRC60, it's key equipment to enhance precision. The hard alloy broach can broaching ten thousａnd work piece per sharpening and can sharpening frequency15 times.
This broaching machine manufactured success filling China's blank.
主要技術參數:
1、額定拉力x額定行程: 50KNx800mm
2、拉削速度(無級調速) 0-80m/min
3、主滑板返回速度(無級調速) 0-80m/min
4、齒形精度5級
5、拉削表面粗糙度: Ra 1.6-0.8
Main technical parameters: .
1. Rated force x Rated Trave:50kN x800 mm
2. Broaching speed(continuously viable):0-80 m/min
3.Return speed(continuously viable):0-80 m/min
4.tooth profile precision:5grade
5.Surface roughness:Ra 1.6-0.8
