BB25-1 / 500臺式車床
BB25L-1 / 700 臺式車床
本機床適用于小型機械修配、加工，特別適用于家庭、科研實驗室及教學.
技術參數Specification
Model | BB25-1（500）BB25L-1（700） |
中心高Height of spindle centers | 125mm |
床身上大回轉直徑Max swing diameter over bed | 250mm |
大工件長度Max length of workpiece | 500/700mm |
大切削長度Max. length cutting | 450/600mm |
刀架上大回轉直徑Max workpiece diameter over carriage | 130mm |
主軸通孔直徑Spindle bore | 27mm |
主軸錐孔Taper of hole in spindle | Morse No.3 |
主軸轉速級數Number of spindle rotating speed | 6 steps |
主軸轉速Range of spindle speeds (forward-revere) | 140-1700r.p.m. |
主軸每轉進給量Range carriage/Number of longitudinalfeed | 0.05-0.3mm/r/4 |
公制螺紋種數Number of metric screw thread | 20 kinds |
公制螺紋螺紋螺距范圍Metric screw thread range | 0.2-3.5mm |
英制螺紋種數Number of inch screw thread | 20 kinds |
英制螺紋螺紋螺距范圍Inch screw thread range | 8-56t.p.i. |
Number of model screw thread | 10 kinds |
Model screw thread range | 0.2-1.25 |
Range carriage/Number of longitudinal feed | 0.05,0.1mm/2 |
主軸中心線距*基面距離Dis. spindle center to bottom of square head | 15mm |
刀架大轉動角度Max. swivel angulity of tool slide | 45° |
Travel of every screw division of cross slide | 0.04mm |
Travel of every screw division of rool slide | 0.04mm |
小刀架大行程Max. longitudinal travel of tool slide | 70mm |
刀架橫向大行程Max. transverse travel of cross slide | 115mm |
尾座套筒錐度Taper of the hole in tailstock | Morse No.2 |
尾座套筒大行程Max. travel of tailstock sleeve | 70mm |
電機Motor | 550W 220VAC/380VAC 50Hz |
外形尺寸（長X寬X高) Overall dimensions ( LXWXH ) | 1250/1450X540X400mm |
凈重Net weight | 155/175Kg |
具體產品信息以我公司給出的產品目錄及實物產品為準
以上報價（優惠價）不含運費和發票，如需加10-16%，付款需在貨款總額加1%。
