技術參數 | Specifcatinos | C6132D | C6232D |
中心高 | Center height | 160mm | |
床身上大工件直徑 | Max.Swing over bed | 320mm | |
刀架上大工件直徑 | Max.Swing over carriage | 180mm | |
馬鞍槽大工件直徑 | Max.Swing in gap | —— | 520mm |
馬鞍槽有效長度 | Effective gap length | —— | 200mm |
大工件長度 | Max.Length of workpiece | 750/1000mm | |
床身寬度 | Width of bed | 310mm | |
主軸孔錐度 | Spindle taper | 莫氏6號MT6 | |
主軸通孔直徑 | Thru-hole of spindle | 52mm | |
轉速范圍 | Range of spindle speeds | 30-1600r/min(12steps) | |
橫刀架行程 | Cross toolpost travel | 240mm | |
小刀架行程 | Compound toolpost travel | 140mm | |
尾座行程 | Tail stock center travel | 90mm | |
尾座套筒錐度 | Tail stock sleeve taper | MT4 | |
電機功率 | Spindle motor | 3/4kw | |
公制螺紋 | Rang go metic threads(kinds) | 0.45-20mm(30種) | |
英制螺紋 | Range of inch threads(kinds) | 80-1 3/4 tpi(35種) | |
縱向進給 | Longitudinal feed per sindle rev. | 0.039-1.1mm | |
橫向進給 | Corss feed per spindle rev. | 0.018-0.55mm | |
外形尺寸 | Overall dimensions for 750mm | 2000*1130*1540 | |
Overall dimensions for 1000mm | 2250*1130*1540 | ||
凈重 | Net weight of 750mm | 1400kg | |
Net weight of 1000mm | 1500kg | ||
