本產品已獲美國發明.中國臺灣.大陸等多國多項
本虎鉗原理是採用自行研發之往復式空氣馬達（結構），以氣壓連續推動油路方式，來達成自動化，且不需三點組合來過濾水氣，其特性為全國所僅有甚而越國外任何廠牌。
This Product Is The Exclusive Patent Authorized By U,S,A,Taiwan And P.R.C
The principle of this vice is adopting the reciprocating pneu.motor (PAT.stucture) which P&D by inhouse and that employs an air actuated cylinder.Circuiting progressively to make automation,no need the R.F.L unit to filter the moisture,the sole character is superior than any brand in domestic & international market.
高夾持力
空氣源8kg/cm2之低壓源，即可達9000kgf之高挾持力，而挾持力從0-900kgf可藉由調壓器自由調整設定。
Super hi-gripping force
Even the air source at low pressure 8kg/cm2 which can be achieved super hi-gripping force 9000kgf, and the 0~9000kgf gripping force can be adjusted freely by pressure regulator.
自動尋找高氣壓源
當銅鋁類產品輕加工或鑄鐵類初胚重切削時，用調壓器設定在所需壓力，也不會因空氣源在低點而失壓，而且有自動補壓及穩壓之功能，以確保工件之挾持。
Seeking the highest air source automatically
When processed copper, aluminium etc.non-iron workpiece or raw cast iron etc.,making heavy cutting which can be made adaptable gripping force to ensure work piece clamping and with auto compensating & retaining pressure etc.,functions.
大挾持安全距離
開關速度只需1.5秒，挾持安全距離可達8mm ,並設有手輪安全缐，可輕易由肉眼辨識出工件挾持之安全距離，是否限
The biggest safety clamping range:
The shifting speed is only 1.5 sec.with safety range 8mm,also equipped with safety line on hand wheel and can be visible the clamped work piece safety range is exceeded or not.
立、側、臥三用
定寸規格，本體六面磨光並預留壓板槽，不需治具板，即可直立加工。
Triple usage of vertical. side. horizontal
Six faces of vice body be super grinding & pre-setting holding slot,and can be processed vertically without jig fixture.
高材質
虎鉗本體材質採用高延展性之石墨鑄鐵（FCD-60）一體成型設計。兩側滑軌經硬化熱處理（HRC-45）,確保高精度，高耐磨，高抗張力。
Super rugged material
The vice body is adopted hi-tensile graphite casting iron (FCD-60),one-piece design and harden heat-treatment (HRC45) at two slide which ensured hi-precision ,hi-durability & hi-tensile.way
內藏角固下壓結構
Submersed angle fixed pressed down structure