主要技術參數Main technical parameters | |||
項目Project | 單位Unit | LX-1270 | LX-1370 |
工作臺Table | |||
工作臺尺寸Table size (length x width) | mm | 700x1360 | 710x1400 |
T型槽（寬x槽數） T- slot (width x slot number) | mm | 18x5 | 18x5 |
大載重 maximum loading | kg | 1000 | 1000 |
工作臺面至地面距離 Distance from table surface to ground | mm | 950 | 900 |
行程 Travel | |||
X軸行程Longitudinal travel | mm | 1200 | 1300 |
Y軸行程 Lateral travel | mm | 680 | 700 |
Z軸行程 Vertical travel | mm | 600 | 650 |
主軸鼻端至工作臺面距離 Distance from spindle nose to table surface | mm | 150-750 | 150-830 |
主軸中心距至機柱滑道距離 Distance from spindle center to column slide | mm | 785 | 785 |
主軸 Spindle | |||
主軸錐度 Spindle taper |
| BT40( BT50) | BT40( BT50) |
主軸轉速 Spindle speed | rpm | 7000/8000 | 6000 |
主軸檔數 Spindle number |
| 1 | 1 |
主軸冷卻/潤滑方式 Spindle cooling / lubrication mode | 油冷/油脂潤滑 Oil / grease lubrication | C04PT | C04PT |
進給Feed | |||
切削進給 Cutting feed | mm/min | 1-10000 | 1-10000 |
快速進給 Rapid feed | m/min | 15/15/15 | 15/15/15 |
小進給量 Minimum feed | mm | 0.001 | 0.001 |
馬達 Motor |
| ||
主軸馬達 Spindle motor | kw | 11/15 | 15/18.5 |
三軸馬達X/Y/Z axis motor | kw | 3/3/4 | 4/4/4 |
冷卻泵浦 Coolant pump | kw | 1.64 | 1.64 |
水箱容量 Water tank capacity | m3 | 0.29 | 0.29 |
刀庫Tool | |||
刀庫種類 Type of tool |
| 門笠/圓盤 Armless/Arm type | 門笠/圓盤 Armless/Arm type |
刀庫規格 Tool specification |
| BT40 | BT50 |
刀庫容量 Tool storage capacity |
| 20/24 | 20/24 |
大*直徑x長度 Max tool diameter x Length |
| Φ90x300 | Φ110x300 |
安裝需求 Installation requirements | |||
電力容量 Power capacity | KVA | 25 | 30 |
氣壓壓力 Air pressure | kg/cm2 | 5-7 | 5-7 |
空氣流量 Air flow | l/min | 100 | 100 |
占地空間 Floor space | mm | 3800x3300x3100 | 3500x2900x3350 |
凈重 Net weight | kg | 8500 | 10000 |
