1756-DNB/ABPLC模塊
RS-422與RS-485標準都規定了接收器門限為±200mV。這樣規定能夠提供比較高的噪聲抑制能力，如前文所述，當接收器A電平比B電平高+200mV以上時，輸出為正邏輯，反之，則輸出為負邏輯。但由于第三態的存在，即在主機在發端發完一個信息數據后，將總線置于第三態，即總線空閑時沒有任何信號驅動總線，使AB之間的電壓在-200～+200mV直至趨于0V，這帶來了一個問題：接收器輸出狀態不確定。如果接收機的輸出為0V，網絡中從機將把其解釋為一個新的啟動位，并試圖讀取后續字節，由于永遠不會有停止位，產生一個幀錯誤結果，不再有設備請求總線，網絡陷于癱瘓狀態。除上述所述的總線空閑會造成兩線電壓差低于200mV的情況外，開路或短路時也會出現這種情況。故應采取一定的措施避免接收器處于不確定狀態。
1756-DNB/ABPLC模塊
1756
MFR. PART NUMBER DESCRIPTION
1756-A10 10 SLOT CONTROLLOGIX CHASSIS
1756-A13 13 SLOT CONTROLLOGIC CHASSIS
1756-A17 CHASSIS 17 SLOT CONTROLLOGIX
1756-A4 4 SLOT CONTROLLOGIX CHASIS
1756-A7 7 SLOT CONTROLLOGIX CHASSIS
1756-BA1 LOGIX5000 BATTERY ASSEMBLY
1756-CFM 2 CHANNEL /2 OUT CONFIGURABLE FLOWMETER
1756-CNB CONTROLNET BRIDGE MODULE
1756-CNBR CONTROLNET REDUNDANT BRIDGE MODULE
1756-CP3 LOGIX5000 RS232 PROGRAMMER CABLE
1756-DHRIO 2 CHANNEL DH+ AND/OR RIO SCANNER
1756-DNB DEVICE NET BRIDGE/SCANNER MODULE
1756-DPALEN CONTROLLOGIC SYSTEM DOCUMENTATION SET PRINTED
1756-ENET ETHERNET/IP BRIDGE MODULE
1756-GTWY CONTROLLOGIC GATEWAY CONFIGURATION SOFTWARE
1756-GTWYR SUPT REINSTATEMENT CONTRACT FOR 1756GTWY
1756-GTWYS SUPT RENEWAL CONTRACT FOR 1756GTWY
1756-HSC 2 CHANNEL /4 OUTPUT HIGH SPEED COUNTER
1756-IA16 79-132 VAC INPUT 16PTS
1756-IA16I 79-132 VAC ISOLATED INPUT 16PTS
1756-IA8D VAC DIAGNOSTIC INPUT 8PTS
1756-IB16 VDC INPUT 16PTS
1756-IB16D VDC DIAGNOSTIC INPUT
1756-IB16I VDC ISLOTED INPUT 16PTS
