L51系列下拉式拉床用途和特點
本系列機床為單油缸下拉式立式內拉床，用于拉削各種形狀的內孔表面（如圓孔、內花鍵、內齒等），生產效率高，適用于大批量生產。
●采用液壓傳動，工作平穩，能無級調速。
●具有超負荷保險裝置。
●具有自動循環功能、分段循環及點動調整功能。
●由PLC程序控制，所有操作在總按鈕站上完成，方便可靠。
●具有自動沖屑、自動調刀、自動推料等功能。
●占地面積小，需挖地坑或搭建站架。
●適宜加工精度要求較高的中小工件。
Applications and Advantages
This vertical internal broaching machine is designed with single oil cylinder and stationary worktable. It can be used to broach the inner surface of holes with various shapes (e.g. round holes, internal splines and inner gears). The machine is suitable for large batch production with high production efficiency.
● stable workpiece and stepless speed regulation due to hydraulic drive.
● equipped with a safety device against over load
● Work modes: automatic cycle, segmented cycle and inching adjustment.
● PLC programmed control allows all operations to be completed on main button control station conveniently and reliably.
● with functions of automatic chip flushing, automatic tool adjusting and automatic workpiece pushing.
● low space requirement, ground-level installation of the machine without a pit or pedestal.
● designed to machine small and medium-sized workpieces required higher accuracy.
L51系列下拉式拉床主要技術參數Main Technical Specifications
機床型號 Model | L5106B | L5110B | L5120C | L5140B | 單位 Unit | |
額定拉削力 Rated broaching force | 60 | 100 | 200 | 400 | KN | |
大行程 Max.stroke length | 800 | 1250 | 1600 | 2000 | mm | |
拉刀長度范圍 Length range of broaching tool | 700-920 | 700-1250 | 830-1600 | 1300-2000 | mm | |
拉刀中心至主溜板面的距離 Max. Height of workpiece |
| 160 | 230 | 300 | mm | |
工作臺 Worktable | 工作臺尺寸（長×寬） Worktable size (L×W) | 500×330 | 450×450 | 600×500 | 630×500 | mm |
工作臺孔徑 Hole diameter of worktable | φ120 | φ150 | φ200 | φ250 | mm | |
主溜板 Main slide carriage | 拉削速度 Work speed | 3-8 | 3-8 | 3-8 | 3-8 | m/min |
返回速度 Return speed | 3-16 | 3-16 | 3-16 | 3-16 | m/min | |
輔溜板 Aux. Slide carriage | 拉刀送進速度 Work speed of cutter | 3-8 | 3-8 | 3-8 | 3-8 | m/min |
拉刀返回速度Return speed of cutter | 3-16 | 3-16 | 3-16 | 3-16 | m/min | |
主泵 Main pump | 額定流量 Rated flow | 47 | 146 | 210 | 320 | L/min |
額定壓力 Rated pressure | 12 | 8 | 8 | 8 | MPa | |
電機 Motor | 主泵電機功率 Motor power of main pump | 7.5 | 15 | 30 | 45 | KW |
輔泵電機功率 Motor power of aux. pump | 3.75 | 3.75 | 3.75 | 3.75 | KW | |
冷卻泵電機功率 Motor power of cooling pump | 0.75 | 1.1 | 1.5 | 2.2 | KW | |
機床凈重（約） Machine net weight (approx.) | 6000 | 10000 | 15000 | 26000 | Kg | |
機床占地空間（長×寬×高） Machine floor space(L×W×H) | 2080×1100×3300 | 3430×2100×4175 | 4025×2530×5200 | 4180×3100×6640 | mm | |
標準試件拉削后孔中心線對基面垂直度 Perpendicularity between base and hole centerline of standard workpiece after broaching | ≤0.06/200 | ≤0.06/200 | ≤0.06/200 | ≤0.06/200 | mm | |
