GD-150C二軸數控精密段差外圓磨床采用頭尾架兩頂的結構方式，自動刃磨外徑2- 120mm，長度小于300mm的外圓、外錐面及倒角。
1、二軸數控精密段差外圓磨床采用新代伺服控制系統，并配置段差磨削程序，配置在線修整裝置。工件頭架采用日本NSK精密主軸軸承，砂輪發藍能同
時裝2片砂輪，滿足一次裝夾完成粗、精磨的工藝需求。
2、機床配置自動冷卻裝置和吸霧裝置、自動滅火裝置、冷卻系統異常保護程序、報警蜂鳴器，機床正面活動拉門、左右及后面有維修
門，擺動式按鈕，工人啟停按鈕。
GD-150C | |
砂輪架左右移動有效行程X軸 Left and Right Effective Travelling of Grinding Wheel Frame X-axis X-axis | 350 mm |
砂輪架前后移動有效行程Y軸 Feed and Back Effective Travelling of Grinding Wheel Frame Y-axis | 180 mm |
砂輪軸轉速（變頻調速）Rotation Speed of Grinding Wheel Frame (Frequency Conversion and Adjusted Speed) | 1000～3000rpm |
砂輪線速度 Linear Velocity of Grinding Wheel | 18～54m/s |
砂輪主軸功率 Spindle Power of Grinding Wheel | 4KW |
砂輪尺寸（金剛石砂輪）Grinding Wheel Size (Diamond Grinding Wheel) | 350×127×20/65 |
工件頭架中心高 Centre Height of Workpiece Head Stock | 105mm |
工件頭架A軸轉速（變頻調速）A-axis Rotation Speed of Workpiece Head Stock (Frequency Conversion and Adjusted Speed) | 0-500rpm |
工件頭架錐孔 Bore-Hole of Workpiece Head Stock | Is050 |
工作臺水平面內凋整角度（配有千分表微調安裝附件）Adjusted Angle in Horizontal Plane of Work table (Has Dial Gage to install attachment) | +10°/-10°每格讀數值為0.5º |
工件頭架水平面內凋整角度 Adjusted Angle in Horizontal Plane of Work Head Stock | +70°/-70°每格讀數值為1º |
工件磨削直徑范圍 Grinding Diameter Range of Workpiece | Φ2—Φ120mm |
工件磨削大長度 Grinding Max. Length of Workpiece | 300mrn |
工件主軸徑向跳動 Workpiece Spindle Redial Runout | ≤0.005mm |
磨頭主軸徑向跳動 Grinding Head Spindle Redial Runout | ≤0.005mm |
X軸分辨率 X-axis Resolving Power | 0.00lmm |
Y軸分辨率 Y-axis Resolving Power | 0.00lmm |
機床外形尺寸 Machine Size | 1800×1650×1750 |
機床重量 Machine Weight | 2.5T |
