4061DC-S自動換刀大功率金屬切削機床主軸應用：
| 鉆, 銑, 磨, 雕刻機床 | Applications | Drilling, Milling, Grinding, Engraving | |
| 外殼夾裝尺寸 | 60 mm | Clamping diameter | 60 mm |
| 馬達類型 | 無刷同步高速電機 | Motor system | Brushless DC motor (BLDC) |
| 轉速范圍 | 2,500 – 60,000 min-1 | Speed range | 2,500 - 60,000 rpm |
| 額定電壓 | 230 V | Voltage | 230 V |
| 電流 | zui大 12 A | Current | max. 12 A |
| 扭矩t | zui大 65 Ncm | Torque | max. 65 Ncm |
| 頻率 | 33 – 1,000 Hz | Frequency | 33 - 1,000 Hz |
| 功率 | zui大 3,000 W | Output power | max. 3,000 W |
| 重量 | 3.3 kg | Weight | 3.3 kg |
| 軸承 | 3 x 陶瓷軸承, 油脂潤滑 | Bearing system | 3 x Hybrid, lifetime lubrication |
| 保護等級 | IP 54 | Protection category | IP 54 |
| 電機保護 | PTC - 100 °C | Motor protection | PTC - 100°C |
| 安裝位置 |
| Working position |
|
| 負載方向 | 軸向 + 徑向 | Load direction | axial + radial |
| 錐面跳動 | 通常 1 µm | Run-out (taper) | typ. 1 µm |
| 刀具夾持范圍 | Ø 1.0 – 6.35 mm (包括 1/8 + 1/4") | Chuck clamping range | Ø 1.0 - 6.35 mm (incl. 1/8 + 1/4") |
| 換刀方式 | 2 開口扳手 (SW 13 + 10) | Tool change | 2 open-end wrenches (13 + 10 mm) |
| 冷卻系統 | 外夾具冷卻 | Cooling system | Cooling via clamping bracket |
| 防水防塵措施 | 密封氣 0.5 – 0.8 bar (管徑 Ø內/外 4/6 mm) | Protected against dirt | Seeling air 0.5 - 0.8 bar (hose Ø inner/outer 4/6 mm) |
| 外殼材料 | 不銹鋼 | Housing material | Stainless steel |
| 推薦變頻器 | e@syDrive® 4438, TV 4538 | Inverter recommendation | e@syDrive® 4438, TV 4538 |
|
| 保留修改權 |
| Subject to change without notice |
